EverGuard® TPO 80‑mil Membrane About

EverGuard® TPO 80‑mil Membrane Specs

EverGuard® TPO 80‑mil Membrane Docs

EverGuard® TPO 80‑mil Membrane Videos

Specifications (All Dimensions are Nominal)
Thickness Over Scrim31.4 mils (0.798 mm) (Nominal) [ASTM D7635]
Breaking Strength335 lbf x 320 lbf (499 x 477 kg/m) [ASTM D751 Grab Method
Elongation at Break30% [ASTM D751]
Tear Strength65 lbf x 160 lbf (96.85 x 238.4 kg/m) 8" x 8" (203 x 203 mm) [ASTM D751]
Factory Seam StrengthMin. 66 lbf (98.34 kg/m); 160 lbf (membrane failure) (238.4 kg/m) [ASTM D751]
Puncture Resistance>380 lbs. (172 kg) [FTM 101C, Method 2031]
Cold Brittleness-40° C [ASTM D2137]
Permeance0.08 Perms [ASTM E96]
Dimensional Change0.4% [ASTM D1204 @158° F (70°C), 6 hr.]
Water Absorption0.7% [ASTM D471 @158° F (70°C), 1 week]
Hydrostatic Resistance430 psi [ASTM D751 Method D]
Ozone ResistanceNo visible deterioration @7 x magnification [ASTM D1149]
Weather ResistanceMin. 10,080 KJ/(m² . nm) @340 nm; >25,000 KJ/(m².nm) at 340 nm [ASTM G155/D6878]
Heat Aging60 weeks, 100% [ASTM D573]
ColorsWhite, Tan, Gray
Full Roll Size10' x 100' (3.05 x 30.5 m) (1,000 sq. ft.[92.9 m²])
Half Roll Size5’ x 100’(1.52 x 30.5 m) (500 sq. ft.[46.5m²])
Thickness0.080" (2.03 mm)
Thickness Over Scrim: 31.4 mils (0.798 mm) (Nominal) [ASTM D7635]
Breaking Strength: 335 lbf x 320 lbf (499 x 477 kg/m) [ASTM D751 Grab Method
Elongation at Break: 30% [ASTM D751]
Tear Strength: 65 lbf x 160 lbf (96.85 x 238.4 kg/m) 8" x 8" (203 x 203 mm) [ASTM D751]
Factory Seam Strength: Min. 66 lbf (98.34 kg/m); 160 lbf (membrane failure) (238.4 kg/m) [ASTM D751]
Puncture Resistance: >380 lbs. (172 kg) [FTM 101C, Method 2031]
Cold Brittleness: -40° C [ASTM D2137]
Permeance: 0.08 Perms [ASTM E96]
Dimensional Change: 0.4% [ASTM D1204 @158° F (70°C), 6 hr.]
Water Absorption: 0.7% [ASTM D471 @158° F (70°C), 1 week]
Hydrostatic Resistance: 430 psi [ASTM D751 Method D]
Ozone Resistance: No visible deterioration @7 x magnification [ASTM D1149]
Weather Resistance: Min. 10,080 KJ/(m² . nm) @340 nm; >25,000 KJ/(m².nm) at 340 nm [ASTM G155/D6878]
Heat Aging: 60 weeks, 100% [ASTM D573]
Colors: White, Tan, Gray
Full Roll Size: 10' x 100' (3.05 x 30.5 m) (1,000 sq. ft.[92.9 m²])
Half Roll Size: 5’ x 100’(1.52 x 30.5 m) (500 sq. ft.[46.5m²])
Thickness: 0.080" (2.03 mm)
Codes & Applicable Standards
FMFM approved
Miami-Dade CountyMiami-Dade County Product Control approved
SPRIYes
FM: FM approved
Miami-Dade County: Miami-Dade County Product Control approved
SPRI: Yes
Testing Methods
ASTM D7635Min 30% of Total Thickness
ASTM E96Min. Not established
FTM 101C Yes
ULYes
ASTM D7635: Min 30% of Total Thickness
ASTM E96: Min. Not established
FTM 101C : Yes
UL: Yes
Energy Rating
ENERGY STAR® Certified (U.S. only)Only valid in the USA
Title 24 (California Energy Commission)Yes
Miami 21 (Florida Building Code)Yes
CRRCYes
ENERGY STAR® Certified (U.S. only): Only valid in the USA
Title 24 (California Energy Commission): Yes
Miami 21 (Florida Building Code): Yes
CRRC: Yes
Shipping and Packaging
Full Roll Weight420 lb. (190 kg)
Half Roll Weight210 lb. (95 kg)
Full Roll Weight: 420 lb. (190 kg)
Half Roll Weight: 210 lb. (95 kg)

      TPO Training and Education

      Take advantage of industry-leading training and education though CARE - The Center for the Advancement of Roofing Excellence.
      Roofing It Right with Dave and Wally

      Roofing It Right with Dave and Wally

      When you’re facing your next low-slope roofing challenge, you’re going to wish you had Dave and Wally up there with you. These two consummate roofing pros bring three important tools to every job: experience, ingenuity and a sense of humor.
      Watch the videos

      Where to buy

      Find a commercial distributor near you.

      Find a contractor

      Find a GAF certified contractor near you.

      Get Support at Every Phase of Your Project

      PLANNING

      Get assistance with detail drawings and products
      GET STARTED

      PURCHASE

      Receive support from your local territory manager
      CONNECT

      DELIVERY

      Get delivery instructions or see status updates
      GET STATUS