EverGuard® One‑Part Pourable Sealant Specs

      EverGuard® One‑Part Pourable Sealant Docs

      EverGuard® One‑Part Pourable Sealant Installation & Assembly Videos

      Why EverGuard® One‑Part Pourable Sealant?

      A one-part, moisture-cure, self-leveling sealant designed for use in pitch pans on single-ply roof systems. Since moisture-cure sealants cure with moisture in the air, it is suitable for application in damp and cold climates, as well as in dry. EverGuard® One-Part Pourable Sealant is solvent free (less than 25 g/L VOC), contains no isocyanates, and because it is 100% solids, will not shrink upon curing. It is self-leveling, leaving a smooth, professional finished look with good color stability. It does not “outgas” or bubble on damp surfaces as urethane sealants often do.

      EverGuard® One-Part Pourable Sealant is elastomeric and has excellent adhesion to most construction materials, has a 20-minute skin-over time, and is paintable within 24 hours. It has a low durometer, which accommodates greater movement in penetration seals than typical urethane sealants. No special tools or mixing is required and can be applied at temperatures as low as 30°F (-1°C).

      Where to buy

      Find a commercial distributor near you.

      Find a contractor

      Find a GAF certified contractor near you.

      Get Support at Every Phase of Your Project

      PLANNING

      Get assistance with detail drawings and products
      GET STARTED

      PURCHASE

      Receive support from your local territory manager
      CONNECT

      DELIVERY

      Get delivery instructions or see status updates
      GET STATUS