Shield Your Roof From Ice and Water Damage with Leak Barriers

By Annie Crawford 07-06-2021
QUICK SHARE
Tag Icon

Your roofing system is made up of protective layers, designed with the latest technological advances to shield your home from ice and water- keeping your roof deck dry and safe. One of these layers is called a leak barrier, which is often referred to as ice and water shield. Located below the shingles, it's crucial to your roof system's defense against moisture.

Peel and stick leak barrier can give your roof the upper hand against wind-driven rain and ice. By blocking ice and water from creeping past shingles, leak barriers help keep your roof deck dry and can help prevent costly moisture damage. They can also help protect against leaks caused by roof settling.

Roof shingles play an important role in protecting your home. However, they can't do it alone—as shingles continually withstand the elements, water can find its way into vulnerable areas of the roof such as valleys, eaves, flashings or penetrations. Leak Barriers are a powerful preventative defense for keeping roof decking dry. Some of the problems it can help prevent include:

  • Moisture stains. Over time, unchecked leaks can make their way into your ceiling and walls due to seepage. This damages insulation, stains walls, and leads to water damage.
  • Potential mold growth. If attic or wall insulation begins to retain water after roof leaks, this moisture can harbor mold. Mold may also be the long-term result of wet decking. Unaddressed, mold quickly becomes a serious health hazard and sizable cost concern.
  • Higher utility bills. Leaks hurt your insulation's ability to resist heat flow—otherwise known as its r-value. A lower r-value can result in higher heating and cooling bills.
  • Roof System Degradation. Long-term leaks can cause roof decking to de-laminate or rot. Over time, degraded roof decking can put your entire roofing system at risk, potentially requiring a roof replacement or major repair.

Every roof has vulnerable points: In particular, the joints at valleys, eaves and rakes, and around skylights and chimneys are notoriously susceptible to leaks. But you can add protection so that moisture doesn't have a chance to sneak down to your roof deck. Adding leak barriers is like giving your roof body armor—it will help to withstand wind-driven rain, the damaging impact of ice dams, and backup from gutters. Your best strategy to protect these critical roof locations is to install leak barriers before installing flashing.

Fortunately, installation is straightforward. Peel-and-stick options like the StormGuard® Film-Surfaced Leak Barrier or the WeatherWatch® Mineral-Surfaced Leak Barrier roll directly onto your dry roof deck.

ice and water shield roll onto roof

Leak barriers, or ice and water shields, are self-sealing underalyments. This means that in addition to offering easy, roll-on installation, the protective underlayment seals down tight around nails to keep intrusive water at bay.

Investing in the right roofing system is one of the biggest decisions for homeowners. Think of a leak barrier as added insurance for your investment. Whether you choose a film-surfaced leak barrier or a mineral-surfaced leak barrier, you'll get peace of mind and added roof protection. Plus, by installing not only shingles, but a full roofing system, you may be eligible for enhanced warranty coverage on your entire system. For example, when you install GAF Lifetime* shingles and at least 3 qualifying accessory products, including a leak barrier, you automatically receive the GAF Roofing System Limited Warranty, which offers Lifetime* warranty coverage on your qualifying accessory products as well.

Leak Barriers shield your roof, home, and family from the harmful effects of wet weather. Ready to get started protecting your home? Contact a local contractor certified by GAF** to get started.


*The word "Lifetime" refers to the length of coverage provided by the GAF Shingle & Accessory Ltd. Warranty or the GAF Roofing System Limited Warranty, and means as long as the original individual owner(s) of a single-family detached residence [or the second owner(s) in certain circumstances] owns the property where the shingles and accessories are installed. For owners/structures not meeting the above criteria, Lifetime coverage is not applicable. Lifetime ltd. warranty on accessories requires the use of at least three qualifying GAF accessories and the use of Lifetime Shingles.

**Contractors enrolled in GAF certification programs are not employees or agents of GAF, and GAF does not control or otherwise supervise these independent businesses. Contractors may have agreed that they will use GAF roofing products, and may receive benefits, such as loyalty rewards points and discounts on marketing tools from GAF for participating in the program.

ABOUT THE AUTHOR
Annie Crawford is a freelance writer in Oakland, CA, covering travel, style, and home improvement. Find more of her work at annielcrawford.com.
Don't miss another GAF RoofViews post!
LATEST UPDATES
In 2022, GAF launched a first-of-its-kind initiative in Pacoima, one of the hottest neighborhoods in Los Angeles, to explore community-wide solutions to combat urban heat. The GAF Cool Community Project is addressing the complex issue of extreme heat through a research-driven approach: Take a hot, sun-exposed community with an abundance of heat-retaining surfaces. Then, apply solar-reflective coatings to its streets and public hardscapes. With resources and support from GAF and non-profit partners, more than 700,000 square feet worth of streets, parking lots, and other hardscapes were coated with StreetBond DuraShield with Invisible ShadeTM technology over a contiguous 10-block area. The formerly dark streets were transformed to a cool gray-blue, and colorful coatings brighten the basketball courts and other public gathering spaces.
Longtime fixtures of playgrounds and recreational areas, sports courts have a lot to offer. In addition to providing opportunities for children and adults to participate in physical activities, they can strengthen communities. There are also other benefits when courts are designed to reduce surface temperatures and protect substrate materials.
What is going on here? No, this roof does not have measles, it has a problem with thermal bridging through the roof fasteners holding its components in place, and this problem is not one to be ignored.
GAF is committed to building more resilient communities in the areas where we live and work. Working with our network of manufacturing communities, we can leverage our expertise, resources, and products to help protect the places we call home. Our local teams lend their time and talents to address the unique needs of each community, as we help support the fundamental needs of shelter, families and workforces.
Cold storage facilities face unique challenges when it comes to maintaining optimal interior temperature levels. Development of cold storage roofing system design documents that both maintain interior temperatures and create an airtight roof system are important to have a high-performing cold storage roof. Uncontrolled airflow into the roofing assembly can lead to condensation within the roof and the presence of icicles or ice balls at the underside of the roof deck. Condensation and ice in the roofing assembly adds weight to the roof assembly, and wet insulation has significantly reduced R-value. A reduction in R-value means that it is more difficult for the insulation to retain interior temperatures, and cooling equipment has to work harder to maintain the interior temperature set points.
Cold storage facilities face unique challenges when it comes to maintaining optimal interior temperatures. One crucial aspect in ensuring efficient temperature control is creating an airtight roof system which can help prevent cooled interior air from escaping, warmer exterior air from entering, reduce thermal loss and condensation potential, all while promoting energy efficiency and prolonging the life of the roof system and building.
This blog contains information created by a variety of sources, including internal and third party writers. The opinions and views expressed do not necessarily represent those of GAF. The content is for informational purposes only. It is not intended to constitute financial, accounting, tax or legal advice. GAF does not guarantee the accuracy, reliability, and completeness of the information. In no event shall GAF be held responsible or liable for errors or omissions in the content or for the results, damages or losses caused by or in connection with the use of or reliance on the content.

Interested in sharing or republishing our content? We kindly ask you to adhere to our guidelines.