EverGuard® TPO Quick-Spray Adhesive

EverGuard® TPO Quick Spray Adhesive is a sprayable, solvent-based contact adhesive useful for bonding smooth TPO membranes to various substrates.

  • Up to 10 squares (93 square meters) of coverage per canister 
  • Can be applied at an ambient temperature of 20°F (-6.7°C) and above for cold weather application. The cylinders must be kept above 50°F (10°C).

Installation Options

  • Substrate should be dry, clean, and free from oil, grease, and other contaminates 
  • Spraying from 8”–12” (203 – 305 mm) away, apply adhesive uniformly to both the substrate and the underside of the membrane 
  • Allow adhesive to dry to a tacky feel before bonding membrane to substrate
  • Apply pressure with a push broom or weighted roller to ensure complete bonding 

Product Documentation

View All Documents

Installation

GAF EverGuard® TPO Quick-Spray Adhesive is ready to use direct from the factory. Review full application instructions for approved substrates and additional application information before use.

  1. Clean, Dry Substrate Prep

    Substrate should be dry, clean, and free from oil, grease, and other contaminates

  2. Uniform Adhesive Application

    Spraying from 8”–12” (203 – 305 mm) away, apply adhesive uniformly to both the substrate and the underside of the membrane

  3. Tacky Feel for Bonding

    Allow adhesive to dry to a tacky feel before bonding membrane to substrate

  4. Pressure for Bonding

    Apply pressure with a push broom or weighted roller to ensure complete bonding