RoofViews

Your Home

5 Tips to Simplify Holiday Light Installation

By Mark Soto

April 02, 2020

Holiday lights lining a modern home with roof shingles

As the winter season approaches, decorating your home with lights is a classic way to show your holiday spirit.

However, there are right and wrong ways to go about this (National Lampoon's Christmas Vacation, anyone?)—and, depending on your roof, the correct ones may not always be easy to accomplish on your own. To help, here are five tips to simplify your annual holiday light installation so you can make your home merry and bright without damaging the roof — or yourself!

1. Keep Safety In Mind

Prioritize safety throughout the entire process of installing holiday lights. Start by making it a team effort — as you decorate, have a partner with you at all times to hold the ladder (for instance) and help in case of emergencies.

Speaking of stepladders, take a refresher on safety with these OSHA guidelines, which include common sense tips such as ensuring your shoes have a strong grip to prevent slipping on the steps, maintaining a 3-point contact with the ladder when climbing or descending, and avoiding wearing loose clothing — which could get tangled or caught on something. Avoid stepping on the roof; instead, install the lights from the ladder. It's less dangerous, and old roofs may not be strong enough to support foot traffic without sustaining shingle damage.

You should also choose a dry day to hang up the lights. If it rained the day before, wait a couple of days until everything dries out. Similarly, avoid days with high winds. Wind makes putting up lights more complicated — and much more dangerous.

2. Measure Adequately

The old adage "measure twice, cut once" also applies to buying materials. Before you buy any lights or tools, measure your area — more than once — so you know exactly what you need. Most holiday light bundles will tell you the number of lights they come with and the cord length; you'll likely just need to calculate how much cord you'll need to buy based on your perimeter.

Using a measuring tape, measure the length from the ground to your roof eaves for any vertical sides where you plan to add lights. You may need to get on a ladder for this, so make sure your installation partner is close by. While you're on the ladder, you can estimate the length of nearby roof valleys as well as taking the opportunity to clean out any debris and leaves in the gutters (we advise using gloves!). From the ground, you or your installation partner should measure the horizontal side length for the gutters and shingles. If you plan on adding lights along the roofline, measure that portion as well.

No matter how confident you are, anyone can make miscalculations. It's a good idea to buy a few more feet of lights than you estimated you may need.

3. Use the Proper Tools

You can easily damage your roof by installing lights incorrectly. One of the crucial things to avoid while decorating is stapling or nailing lights to your shingles and gutters. These punctures can cause openings in the roofing material that lead to water leaks.

Even the smallest holes can allow water to seep into your home and deteriorate the roof decking below the shingles. Small openings also allow cold air to flow in and reduce the overall energy efficiency of your home.

Instead, hang up lights and other decorations using universal clips. These clips attach to the shingles and gutters, allowing you to hook the lights up without punctures. You can find universal clips that let you hang up any type of light. However, some lights may already come with them.

4. Choose the Right Lights

Before you buy your holiday lights, check whether they're designed for outdoor purposes. Some lights are safe for use both indoors and outdoors, while others are only meant for one or the other.

Use the same lights across the entire area to ensure you're getting the same light color for everything. Don't always assume lights are the same color — LED lights aren't always white, and lights of all kinds come in different shades.

If you plan on using lights from the previous year, check that there are no damaged cords. Exposed wires can cause the lights to stop working or even create a fire hazard.

Avoid heavy lights, which can loosen or damage the gutters if they weigh too much. For added convenience, it may be best to choose lights that already come with clips included in the bundle.

5. Install with Consistency

Once you have your tools and lights ready, be consistent in how you install the lights. Horizontally, you can start from left to right or right to left, but make sure to go from top to bottom.

Start by attaching the universal clips to your shingles or gutters anywhere from 6 to 8 inches apart from one another before hooking on the lights. If you want to attach lights around windows, use tape to secure them and space them out the same length as the clips. Ensure that all the lights are pointed the same way, either upward or downward.

Every year is a fresh chance to improve your decorations — and the way you install them. Keeping safety and consistency in mind will give you a smoother holiday light installation process and a better shot at impressing the neighborhood during your winter festivities.

About the Author

Mark Soto is a freelance writer from Milwaukee, Wisconsin. He has comprehensive knowledge of home improvement projects based on his previous work. Mark comes from a family of DIYers and has worked with landscapers, plumbers, painters and other contractors. He also writes about camping and his enthusiasm for the outdoors.

Related Articles

GAF worker applies StreetBond®, a solar-reflective pavement coating, to an asphalt court.
In Your Community

GAF Partners with the Orlando Magic to Revamp a Sports Court

A newly renovated basketball court at Chambers Park Community Center in Kissimmee, Florida, is a slam dunk for local children and families. GAF is proud to have partnered with the Orlando Magic, AdventHealth, and the city of Kissimmee to make this community's hoop dreams come true.The Chambers Park Community Center is a focal point of the Kissimmee community. The facility offers after-school programs, community events, and camps. It also features a popular neighborhood playground and basketball court where friends and families gather.The collaborative work involved in upgrading the sports court—which reopened on January 10, 2024—is just one example of how the GAF Community Matters program supports and celebrates neighborhoods nationwide.Renovating the Court's Coating and DesignThe inspiration for this project came from wanting to enhance the quality of life for the residents of Kissimmee and provide a safe, vibrant place for families to play outdoors. GAF understands the importance of building resilient communities, so the company donated cutting-edge materials and covered the cost of installation labor to ensure the Chambers Park Community Center's new sports court was a perfect outdoor place to play. To make the asphalt court as safe and durable as possible, GAF used StreetBond® solar-reflective, durable pavement coating with Invisible Shade™. The product can help reduce pavement surface temperatures by an average of 10°F while also helping to protect the pavement from premature degradation due to heat and UV rays.In areas where heat collects, also known as "urban heat islands," there tend to be few trees and minimal shady vegetation, so blacktops and hard surfaces—including parking lots, roadways, concrete recreation areas, and roofs—absorb and release heat well into the evening. Over time, these excess temperatures may contribute to heat-related health effects and negatively impact quality of life for local area residents. This wasn't the first time GAF deployed pioneering cooling strategies to enhance a community's experience. As part of the GAF Cool Community project in Pacoima, California, StreetBond® was used to help diminish urban heat island effects. GAF quickly completed the work in Kissimmee and the facility was opened to the public shortly afterward. The sports court's vibrant design uses custom-made colors inspired by the blue retro logo honoring the Orlando Magic's 35th anniversary court.Celebrating the Court's OpeningCurrent and former Orlando Magic players and Kissimmee's Mayor celebrated the court's unveiling. Team mascot STUFF the Magic Dragon joined the festivities to the crowd's delight.Sixty youth from the Chambers Park Community Center after-school program also attended the court's reopening. The students were thrilled to join in a fast-paced basketball skills clinic. The newly launched court was their chance to meet their sports heroes up close, take photos with them, and enjoy their new playground.Investing in Communities of the FutureThe Chambers Park Community Center's sports court is an important gathering space where youth and their families can safely play, build relationships, and develop their skills.With this project, the GAF Community Matters initiative continues its longstanding partnership in neighborhoods across the country. GAF is committed to making a positive difference by offering roofing expertise, resources, and products to help build more resilient communities.Providing safe, high-quality sports courts where residents can gather helps build resilient communities while promoting active, healthy lifestyles—and GAF is proud to play a role. To learn other ways GAF supports communities across the country, visit www.gaf.com/communitymatters.

By Authors Wendy Helfenbaum

May 28, 2024

Aerial shot of roofers repairing homes in the Atakapa Ishak Chawasha community.
In Your Community

Helping the Atakapa Ishak Chawasha Tribe Protect What Matters Most

The Louisiana coast has seen several severe weather events in the last decade, which has made it difficult for many people to rebuild their homes and prepare for future storms. This was the case for the Atakapa Ishak Chawasha tribe, a small community accessible only by boat.The group Rebuilding Together New Orleans recognized the impact a joint effort could have on the region. Together with the GAF Community Matters initiative, and roofing contractor Sunbelt Roofs, the group collaborated with the Atakapa Ishak Chawasha tribe to replace five hurricane-damaged roofs in the tribe's coastal Louisiana homeland.Sowing ResilienceThe week-long roof rebuilding initiative was part of the GAF Community Matters commitment to repair or replace 500 roofs throughout the Gulf region. The goal was to further strengthen and empower the resilience of the families, shelters, and livelihoods of the coastal Atakapa Ishak Chawasha tribe.The Timberline HDZ® RoofCycle™ Series Shingle, which is made with recycled material, was used to protect these homes.Adapting Environmentally"We are stewards of the environment," said Rosina Philippe, a tribal elder of the Atakapa Ishak Chawasha tribe, as she spoke with GAF during the week-long rebuilding initiative. Over a millennium, the tribe has resided in the region, finding all it needs to feed and sustain itself from the environment.However, man-made conditions have significantly impacted the tribe's way of life. The once-forested coastal region is now a salt marsh area, devoid of fresh water and trees, due to levees along the Mississippi River and canals cut through the coastal landscape.These changes have made it "more of a challenge to find the food and plants and medicines that we depend on for our livelihood. But we have been finding them, propagating them, and sharing them with other tribes," said Philippe. "Our way is to accept the natural processes, not change them."Fortifying against Unpredictable WeatherIn addition to the tribe's changing landscape, "what we're dealing with is the unpredictability of the weather," said Philippe. Climate change can cause dramatic temperature swings, which can impact everything from the life cycle of the tribe's crops to the protection of its homes.Situated at the southeasternmost lands of Plaquemines Parish, fingerlike marshland trails out into the Gulf. The homes in the Atakapa Ishak Chawasha community are built on stilts along these watery paths and are accessible only by boat. These homes are often the first line of impact with hurricanes that rip through the Gulf of Mexico.Hurricane Ida—the fifth most expensive hurricane in US history—dealt the water-based community a devastating blow. For nearly two years, the hurricane's impact on tribal homes compounded with each subsequent storm because there wasn't an opportunity to repair its damage.Partnering for StrengthFortunately, through collaborative efforts between the Atakapa Ishak Chawasha, Rebuilding Together New Orleans, GAF, and Sunbelt Roofs, the opportunity to build tribal community resilience through new roofs became available. Bringing in roofing materials and roofers by boat, the Sunbelt Roofs team removed the storm- and hurricane-damaged roofs, repaired roof decking as needed, and installed new GAF roofing systems on the five homes.The roofing materials installed are designed to protect against volatile weather like hurricanes. To provide long-lasting protection against leaks and wind-driven rain, Sunbelt Roofs installed StormGuard® Film-Surfaced Leak Barrier and FeltBuster® Synthetic Roofing Felt. To help prevent shingle blow-off due to high-speed winds, Sunbelt Roofs installed Pro-Start® Starter Strip Shingles.The Timberline HDZ® RoofCycle™ Series shingles that were installed have Dura Grip™ Adhesive, which provides advanced protection from shingle blow-off and wind-driven water creating leaks or water damage.Building Communities TogetherThe initiative with the Atakapa Ishak Chawasha tribe is part of a comprehensive $25 million GAF commitment through 2025 to leverage roofing expertise, resources, and products to help support and empower resilient communities' fundamental needs. Through grants, in-kind donations, and hands-on support, GAF Community Matters is partnering with area organizations that know their communities' needs best.In the Gulf region, GAF partnered with organizations such as Rebuilding Together New Orleans, SBP, Good360, Habitat for Humanity, and Team Rubicon to rebuild or repair 500 Gulf region roofs, train a skilled workforce, and empower communities hard-hit by severe weather.Moving ForwardDespite the challenges of climate change and the changes in their physical landscape, Philippe said, "We still live a rich life here." As the environment changes, the tribe adapts, a demonstration of its resiliency. "These are the new norms that we are having to learn and document and chronicle, this is the information we'll have to pass onto our future generations so that they can continue to inhabit this area," she explained.To learn more about the resiliency work at GAF or to get involved, explore the GAF Community Matters initiative. Special thanks to the Atakapa Ishak Chawasha tribe, a member of the First People's Conservation Council of Louisiana.

By Authors Annie Crawford

April 16, 2024

GAF Sustainability Award winners holding their award.
In Your Community

GAF Celebrates Major Strides in Manufacturing Sustainability

Manufacturing sustainability is a top priority for GAF. In 2022, the company announced its 2030 Planet Goals to "focus on operational improvements, product transparency, and the introduction of circularity in the asphaltic shingle industry."Looking to lead positive change while considering the long-term impact of its business on the planet, GAF identified several goals, including:Diverting 1 million tons of roofing materials from landfills while integrating recycled shingle materials into new shingle productsDiverting 80% of manufacturing waste from landfills, recycling all shingle and TPO scrap that results from the manufacturing process, and recycling or reusing fiberglass mat scraps and coresReducing embodied carbon and operation carbon throughout its manufacturing and operationsAchieving Environmental Product Declarations for its core products, conducting life cycle assessments, and generating 2.5 GW of power from solar roofs in partnership with GAF EnergyMeeting these goals takes time, resources, innovation, and ingenuity, all backed by a team working to build a better world. Every GAF location is striving to meet the company's goals. Looking back on the progress made in 2023, some impressive accomplishments are bringing the company closer to achieving full manufacturing sustainability.Residential ManufacturingThe GAF Mt. Vernon, Indiana, shingle manufacturing plant worked toward achieving sustainable operations through robust recycling efforts. The team established a shingle recycling outlet estimated to divert thousands of tons of asphalt shingles from landfills annually. This has eliminated thousands of dollars in disposal fees and reduced transportation costs.The Mt. Vernon staff found creative ways to keep complex waste materials out of landfills, including working with a local golf course that could take the plant's waste sand. The team implemented an internal recycling program that includes cardboard and packaging materials, increasing its waste diversion score.Commercial ManufacturingAt the Gainesville, Texas, plant that manufactures TPO and Polyiso, team members earned the area's first waste diversion certification for both products' waste streams. They also earned a recycled content certification for each.The plant established a trial program with a plastics recycler to reprocess TPO skin material for reuse in manufacturing new material. Recycling and reusing would divert thousands of tons of waste from landfills and use recycled materials in manufacturing flexible TPO for flashings.The plant also developed a program with a local recycling company that serves as a single source to take its pallets, large cardboard boxes, facers, paper, and plastics.Sustainability All-StarsRecycling and manufacturing sustainability programs wouldn't be possible without the people behind the initiatives. GAF is proud to spotlight these individuals who went above and beyond to meet the company's sustainability goals.Ben AnselmanAs part of the Mt. Vernon team, Anselman was critical to starting the plant's core recycling program. He initiated repairs to an existing baler and established a program for recycling the super sacks. His creativity sparked the partnership with the local golf course to divert aggregate waste from landfills. In addition, he was the champion for the shingle recycling outlet project and repurposed an existing compactor to reinstate a cardboard recycling initiative.Christina Talladira and Amy WilsonThese teammates lead the core recycling program at the Tampa, Florida, manufacturing plant. They worked together to establish aggregate and shingle recycling programs with their local recycling company. Talladira and Wilson consistently look for ways to divert waste streams from landfills. They also handle the administrative needs accompanying these programs, including scheduling loads and tracking waste.Jeremy TisdaleAt the Tuscaloosa, Alabama, plant, Tisdale took the initiative to improve its core recycling program and set up a cardboard recycling program. He also championed a baler trial for glass mat cover and core waste, developing standard operating procedures and a job safety analysis. He was the innovator behind diverting the plant's plastic waste from landfills. He created a program where stretch film and shingle bundle packaging waste is saved in Gaylord boxes and then baled whenever the plant has downtime.Pete WeyrensIn Gainesville, Texas, Weyrens is the champion behind the plant's recycling efforts, establishing relationships with the local recycling company. He also organized the flexible TPO skin material trials. This effort will divert thousands of tons of waste from landfills and use recycled materials to manufacture flexible TPO for flashings.Leslie PeelsAfter the plant in Cumming, Georgia, saw a drop in its year-over-year waste diversion rate, Peels stepped in to turn those numbers around. Leading the effort to separate recyclable materials from regular waste, the Cumming location saw an impressive increase in keeping waste out of the landfill. Peels also set an example in data collection and analysis to keep the plant's sustainability goals on track.TJ Jenkins and Todd WinsteadJenkins and Winstead represent the TPO team at the Mt. Vernon manufacturing plant. Working together, they used their knowledge and experience in the TPO manufacturing process to help earn the plant's recycled content certifications. They also found a way to divert calcium chloride from local landfills and continue to work closely with the sustainability team to support waste diversion efforts.Sustainability PromiseGAF is committed to "Protect What Matters Most," and that includes people, communities, and the planet. Its sustainability promise is an opportunity to invest in a healthy future for everyone. Learn more about that commitment in its sustainability report.

By Authors Karen L Edwards

April 11, 2024

Don't miss another GAF RoofViews post!

Subscribe now