Tips for Shingling Sheds, Gazebos, and Outbuildings

By Steve Maxwell 08-18-2021
QUICK SHARE
Tag Icon

Roofs are the first line of defense against the elements, both for full-time homes and smaller outbuildings. Sheds, garages, workshops, gazebos, pool houses, and other small structures need the same kind of protection as houses, though the job of shingling sheds differs from shingling houses in several ways.

What to Know Before You Start

Besides the obvious differences in size, outbuilding roofs are usually simpler than residential roofs. There are typically no valleys, chimneys, plumbing stacks, roof louvers, ridge vents or static exhaust vents on outbuildings, so shingling requires less cutting and fitting. Outbuildings are typically small, meaning roofs are lower to the ground and often angled at a lower pitch than a house roof. This generally makes it easier to get shingles, tools, and personnel up and down.

So, is shingling a shed, sauna, or gazebo something you should do yourself? Only you can decide if you want to take on the risk. If you do, be sure to follow official safety guidelines when it comes to roof height and slope.

In order to understand the best safety practices for your specific roofing job, you will first want to know the slope of your roof. The Occupational Health and Safety Authority (OSHA) defines a low-slope roof as being no steeper than 4/12 (four inches of rise for every twelve inches of horizontal run). To check your roof slope, grab a 12 inch level, climb up on a step ladder, place one end of the level on the roof and bring the bubble horizontal. If the other end of the level is no more than four inches up from the roof surface, then it's considered low slope. You can reference important safety guidelines followed by professional roofers here as a general guide for how you can keep yourself safe on your job. Please note that OSHA also requires professional roofers to use fall protection gear if the eaves of a roof are more than six feet off the ground. Homeowners taking on a DIY roofing project should also wear the appropriate fall protection gear if the rooing project requires you to be 6 feet off the ground.

DIY Shingling Tips

Only you can decide if you have the physical balance, stamina and experience to safely climb onto even a shallow, small roof structure. You also need to judge if you have the strength to tear off the old shingles (if needed) and haul new shingles onto the roof before nailing them down.

If you decide to tackle DIY shingling for an outbuilding, consider renting a few scaffold frames and platforms. It's much easier, safer and quicker to shingle a roof while working from scaffolding as opposed to a ladder. Erect the scaffolding so the working platform is a convenient height below the eaves of the roof for best results.

You don't need many tools to reshingle a small roof, but choosing the right tools is important. A shingle ripper is far more effective than a shovel for removing old shingles. A hammer and nail pouch work fine for anchoring the shingles, but a roofing nail gun and air compressor make the work go much faster. You can borrow these tools from a friend or rent them. Just remember to always wear safety glasses when nailing.

Be sure to also check your roofing manufacturer's warranty and installation instructions before starting a do-it-yourself roofing project, roof repair, or replacement to ensure you're using the right products and installation techniques to maintain warranty coverage on the product.

Outbuildings aren't always shingled with the same care as full-time homes, and this sometimes shows up as a lack of a metal drip edge. These are strips of factory-finished sheet metal that cap the edges of the roof deck before the underlayment and shingles are put down. If you discover your outbuilding doesn't have a drip edge, be sure to incorporate it into the reshingling job. When properly installed along all edges of a roof, an aluminum drip edge goes a long way to preventing rot from setting in on the edge of the roof deck.

Choosing Shingles

The best-selling asphalt shingle in North America is GAF's Timberline® HDZ, and this could be a premium option for any outbuilding. Considered an "architectural" shingle due to its multilayered design, this shingle is intended to create attractive shadow lines.

Want something more economical? GAF also offers the Royal Sovereign 3-tab shingle. StainGuard technology protects against the growth of blue-green algae, the leading cause of asphalt shingle discoloration. Royal Sovereign also has a top-of-category Class A fire rating.

The best roofs begin with a water resistant barrier before shingles even go down, and this philosophy applies to outbuildings as much as it does to houses. GAF also makes DECK-ARMOR, a breathable roll-type underlayment that goes down on the roof deck before shingles. Breathability isn't something you'll find with all underlayments, but it is definitely a valuable feature.

While shingling sheds and other outbuildings isn't quite as complicated as shingling your home, safety and planning are still essential. Whether you decided to DIY the project or hire a professional, taking some time to learn about the roof and pick out the best available materials can help keep your outbuildings protected from the elements for years to come.

If you decide to hire a professional, you can search for a contractor certified by GAF* by clicking here.

*Contractors enrolled in GAF certification programs are not employees or agents of GAF, and GAF does not control or otherwise supervise these independent businesses. Contractors may have agreed that they will use GAF roofing products, and may receive benefits, such as loyalty rewards points and discounts on marketing tools from GAF for participating in the program.

ABOUT THE AUTHOR
Steve Maxwell is an award-winning content creator who has published more than 5,000 articles, shot countless photos and produced video since 1988. Using his experience as a carpenter, builder, stone mason and cabinetmaker, he has created content for Mother Earth News, Reader's Digest, Family Handyman, Cottage Life, Canadian Contractor, Canadian Home Workshop, and many more. Steve lives on Manitoulin Island, Canada with his wife and children in a stone house he built himself. His website gets 180,000+ views each month, his YouTube channel has 58,000+ subscribers and his weekly newsletter is received by 31,000 subscribers each Saturday morning.
Don't miss another GAF RoofViews post!
LATEST UPDATES
Do you know the warning signs of poor ventilation in a house and attic? Proper ventilation is important in many ways and one of the first big things to know is that it can prolong the life of your roof system. It can also help lower your attic temperature and thereby reduce HVAC wear and tear, which may help lower utility bills and the likelihood of costly repairs. And last, but definitely not least, attic ventilation can help reduce the risk of mold, which can protect the health of your family. All-in-all, attic ventilation offers a long-term return on investment as well as potential preventative health benefits.
Michigan City has been home to a GAF manufacturing facility since 2000, supporting the community's residents through not only the nearly 200 jobs it provides but also countless hours of volunteering. The job creation and increased capacity for serving customers with the GAF Michigan City distribution center expansion is testimony to the company's dedication to building resilient communities.
Getting multiple professionals involved in a commercial roofing project offers a way to capture different perspectives—and to shine a light on some of the industry's hidden complexities—especially when it comes to challenging details like parapet walls.
Asphalt shingles are one of the most widely used roofing materials, providing an elegant yet effective look for homes while also being economical and easy to install. Here is what makes these shingles stand out from other roofing materials.
With an overall industry labor shortage, roofers are in high demand. Those contemplating a career in roofing should consider the training provided by the GAF Roofing Academy, where students can learn the skills and industrial knowledge they need to get started in the industry.
Commercial roof coatings can help extend the life and improve the aesthetics of low-slope roofs. A roof coating acts as the first line of defense against UV damage and water infiltration, and reflective roof coatings can help reduce the temperature of the roof.
This blog contains information created by a variety of sources, including internal and third party writers. The opinions and views expressed do not necessarily represent those of GAF. The content is for informational purposes only. It is not intended to constitute financial, accounting, tax or legal advice. GAF does not guarantee the accuracy, reliability, and completeness of the information. In no event shall GAF be held responsible or liable for errors or omissions in the content or for the results, damages or losses caused by or in connection with the use of or reliance on the content.

Interested in sharing or republishing our content? We kindly ask you to adhere to our guidelines.