Shield Your Roof From Ice and Water Damage with Leak Barriers

By Annie Crawford 07-06-2021
QUICK SHARE
Tag Icon

Your roofing system is made up of protective layers, designed with the latest technological advances to shield your home from ice and water- keeping your roof deck dry and safe. One of these layers is called a leak barrier, which is often referred to as ice and water shield. Located below the shingles, it's crucial to your roof system's defense against moisture.

Peel and stick leak barrier can give your roof the upper hand against wind-driven rain and ice. By blocking ice and water from creeping past shingles, leak barriers help keep your roof deck dry and can help prevent costly moisture damage. They can also help protect against leaks caused by roof settling.

Roof shingles play an important role in protecting your home. However, they can't do it alone—as shingles continually withstand the elements, water can find its way into vulnerable areas of the roof such as valleys, eaves, flashings or penetrations. Leak Barriers are a powerful preventative defense for keeping roof decking dry. Some of the problems it can help prevent include:

  • Moisture stains. Over time, unchecked leaks can make their way into your ceiling and walls due to seepage. This damages insulation, stains walls, and leads to water damage.
  • Potential mold growth. If attic or wall insulation begins to retain water after roof leaks, this moisture can harbor mold. Mold may also be the long-term result of wet decking. Unaddressed, mold quickly becomes a serious health hazard and sizable cost concern.
  • Higher utility bills. Leaks hurt your insulation's ability to resist heat flow—otherwise known as its r-value. A lower r-value can result in higher heating and cooling bills.
  • Roof System Degradation. Long-term leaks can cause roof decking to de-laminate or rot. Over time, degraded roof decking can put your entire roofing system at risk, potentially requiring a roof replacement or major repair.

Every roof has vulnerable points: In particular, the joints at valleys, eaves and rakes, and around skylights and chimneys are notoriously susceptible to leaks. But you can add protection so that moisture doesn't have a chance to sneak down to your roof deck. Adding leak barriers is like giving your roof body armor—it will help to withstand wind-driven rain, the damaging impact of ice dams, and backup from gutters. Your best strategy to protect these critical roof locations is to install leak barriers before installing flashing.

Fortunately, installation is straightforward. Peel-and-stick options like the StormGuard® Film-Surfaced Leak Barrier or the WeatherWatch® Mineral-Surfaced Leak Barrier roll directly onto your dry roof deck.

ice and water shield roll onto roof

Leak barriers, or ice and water shields, are self-sealing underalyments. This means that in addition to offering easy, roll-on installation, the protective underlayment seals down tight around nails to keep intrusive water at bay.

Investing in the right roofing system is one of the biggest decisions for homeowners. Think of a leak barrier as added insurance for your investment. Whether you choose a film-surfaced leak barrier or a mineral-surfaced leak barrier, you'll get peace of mind and added roof protection. Plus, by installing not only shingles, but a full roofing system, you may be eligible for enhanced warranty coverage on your entire system. For example, when you install GAF Lifetime* shingles and at least 3 qualifying accessory products, including a leak barrier, you automatically receive the GAF Roofing System Limited Warranty, which offers Lifetime* warranty coverage on your qualifying accessory products as well.

Leak Barriers shield your roof, home, and family from the harmful effects of wet weather. Ready to get started protecting your home? Contact a local contractor certified by GAF** to get started.


*The word "Lifetime" refers to the length of coverage provided by the GAF Shingle & Accessory Ltd. Warranty or the GAF Roofing System Limited Warranty, and means as long as the original individual owner(s) of a single-family detached residence [or the second owner(s) in certain circumstances] owns the property where the shingles and accessories are installed. For owners/structures not meeting the above criteria, Lifetime coverage is not applicable. Lifetime ltd. warranty on accessories requires the use of at least three qualifying GAF accessories and the use of Lifetime Shingles.

**Contractors enrolled in GAF certification programs are not employees or agents of GAF, and GAF does not control or otherwise supervise these independent businesses. Contractors may have agreed that they will use GAF roofing products, and may receive benefits, such as loyalty rewards points and discounts on marketing tools from GAF for participating in the program.

ABOUT THE AUTHOR
Annie Crawford is a freelance writer in Oakland, CA, covering travel, style, and home improvement. Find more of her work at annielcrawford.com.
Don't miss another GAF RoofViews post!
LATEST UPDATES
Roof trusses provide the structural support for a home's roof, supporting the roof deck material, insulation, and any loads that are placed on the roof. As a result, they have to be strong enough to withstand wind, rain, snow, and any other types of weather that your region might be prone to.
This May, GAF teamed up with This Old House to support their "Protecting the Protectors Contest". The contest was established to give back to first responders who go above and beyond protecting their communities. Watch this video to see how first responders JoAnna, an oncology nurse, and her fiance Andrew, a firefighter, reacted to their brand new GAF Timberline HDZ roof.
Although the GAF Master Select contractor Aqua Seal Manufacturing and Roofing Inc. has a robust team of 100 employees, the workload in the Columbia, South Carolina, metro area always has them looking for more help. As one of the top commercial roofing contractors in their market, they do everything from new construction to reroofing—and their leak detection skills have kept them in high demand for years.
Thinking about switching to a pre-cut shingle starter strip from a cut up 3-tab asphalt shingle? Don't delay. Starter Strips save you time cutting 3-tab shingles, have properly positioned adhesive to help reduce the risk of shingle blow-offs, and allow you to create clean, finished roof edges. Want more details? Here are answers to all your questions about making the switch to pre-cut Starter Strips.
Building a brand-new 250,000-square-foot manufacturing plant and bringing it online takes collaboration, creativity, and teamwork. The newest GAF plant in New Columbia, Pennsylvania, is a testament to how hard work, support from the community, and flexibility all contributed to bringing this new facility to life.
After Danny McLaughlin became the president and CEO of Scro's Roofing Company in 2011, he looked for new ways to scale the business—and he was successful in doing so. "It was on my heart for a long time to be successful but not to stop at success," says McLaughlin. "I wanted to teach others how we got here."
This blog contains information created by a variety of sources, including internal and third party writers. The opinions and views expressed do not necessarily represent those of GAF. The content is for informational purposes only. It is not intended to constitute financial, accounting, tax or legal advice. GAF does not guarantee the accuracy, reliability, and completeness of the information. In no event shall GAF be held responsible or liable for errors or omissions in the content or for the results, damages or losses caused by or in connection with the use of or reliance on the content.

Interested in sharing or republishing our content? We kindly ask you to adhere to our guidelines.