Cobra® SnowCountry® ‑ Exhaust Vent for Roof Ridge About

Cobra® SnowCountry® ‑ Exhaust Vent for Roof Ridge Specs

Cobra® SnowCountry® ‑ Exhaust Vent for Roof Ridge Docs

Cobra® SnowCountry® ‑ Exhaust Vent for Roof Ridge Videos

Specifications (All Dimensions are Nominal)
Cap Shingle Compatible12" (305 mm)
ConstructionPolypropylene
Easy Tear3'' (76 mm) increments
Filter IncludedYes
Installation MethodHand Nail
Net Free Area (NFA)18 sq.in./lin.ft. (116 sq. cm per lm)
Slope/Pitch Range3:12 - 16:12
StyleFiltered Plastic Ridge Vent
Length4' (1.22 m)
Width11.5" (292 mm)
Height⅞” (22.2 mm)
Cap Shingle Compatible: 12" (305 mm)
Construction: Polypropylene
Easy Tear: 3'' (76 mm) increments
Filter Included: Yes
Installation Method: Hand Nail
Net Free Area (NFA): 18 sq.in./lin.ft. (116 sq. cm per lm)
Slope/Pitch Range: 3:12 - 16:12
Style: Filtered Plastic Ridge Vent
Length: 4' (1.22 m)
Width: 11.5" (292 mm)
Height: ⅞” (22.2 mm)
Codes
FBCState of Florida Approved
ICC Evaluation ReportESR-1265
Miami-Dade CountyMiami-Dade County Product Control Approved
TDIMeets requirements of the Texas Department of Insurance
FBC: State of Florida Approved
ICC Evaluation Report: ESR-1265
Miami-Dade County: Miami-Dade County Product Control Approved
TDI: Meets requirements of the Texas Department of Insurance
Testing Methods & Applicable Standards
TAS 100Yes
TAS 100: Yes
Shipping and Packaging
Pieces/Box10
Pieces/Box: 10

    Where to buy

    Find a GAF distributor near you.

    Find a contractor

    Find a GAF certified contractor near you.