GAF Multi-Purpose Primer is a two-component, water-based epoxy, 9-to-1 ratio primer. It is effective at increasing the adhesion of acrylic, polyurethane, butyl, and silicone coatings over most new or existing roof, deck, and wall substrates.
Easy to use
GAF Multi-Purpose Primer may be applied by brush, roller, or spray. Simply mix Part A individually, then add Part B into Part A and mix until achieving a uniform consistency. Once mixed, the usable pot life is approximately 2 hours at 75°F (24°C). Use water and soap to thoroughly flush equipment. If product has hardened, clean with solvent.For full installation details, see the Data Sheet in the DOCS tab.
Blocks asphalt oil bleed-through
Helps prevent unsightly stains from oils that can seep from asphalt substrates.
Promotes adhesion of the top coat to hard-to-stick surfaces.
Tinted for visibility
A slight red tint makes the product easily identifiable on TPO or other white surfaces.
Related components and accessories
GAF Unisil High Solids Silicone Roof Coating A high-solids, moisture-cure silicone coating that provides protection against weather elements, UV rays, and leaks due to ponding water for a variety of substrates. VIEW PRODUCT >
GAF Unisil Silicone Roof Coating Provides protection against weather elements and strong adhesion to a wide range of substrates and resists ponding water. VIEW PRODUCT >
GAF Surface Seal SB Roof Coating A solvent-based, sprayable thermoplastic rubber coating. (Image coming soon!) VIEW PRODUCT >
GAF Acrylic Base Coat An elastomeric acrylic coating used in a base/top coat system to improve the adhesion of GAF Acrylic Top Coat. VIEW PRODUCT >
CONTACT FOR COATINGS SUPPORT Find answers to questions and concerns.