EverGuard® SA TPO Self‑Adhered Roof Membrane Specs

      EverGuard® SA TPO Self‑Adhered Roof Membrane Docs

      EverGuard® SA TPO Self‑Adhered Roof Membrane Installation & Assembly Videos

      About EverGuard® SA TPO self-adhered roof membrane

      GAF EverGuard® SA TPO Self-Adhered Roof Membrane is ready to install direct from the factory.  The factory-applied hot melt pressure sensitive adhesive (HMPSA) helps to retain bonding power at temperatures down to 20°F can help you save time and labor.  No waiting for flash-off and no adhesive containers to dispose of.  GAF EverGuard® SA TPO Self-Adhered Roof Membrane is suitable for jobs on occupied buildings where odor associated with traditional solvent-based adhesives are a concern.


      All the benefits of TPO, plus easier installation

      Excellent protection against the damage caused by heat, weather elements, and UV rays. Heat-welded seams provide excellent long-term performance. Reflective white membrane can help reduce building cooling costs.* Compatible with EverGuard® TPO Accessories.




      *Energy cost savings are not guaranteed and the amount of savings may vary based on climate zone, utility rates, radiative properties of roofing products, insulation levels, HVAC equipment efficiency and other factors.

      FAST AND EASY TO INSTALL

      Up to 60% faster membrane installation than traditional GAF TPO bucket adhesives, according to GAF head-to-head testing under controlled laboratory conditions

      MINIMAL DISRUPTION TO BUILDING OCCUPANTS

      Avoid odor associated with solvent-based adhesives.  Minimal disruption to building occupants makes it a good option for buildings like schools and hospitals

      EASY CLEAN-UP

      No buckets, rollers, or canisters to dispose of — just the release liner

      Installation

      GAF EverGuard® SA TPO Self-Adhered Roof Membrane is ready to install direct from the factory. Review full application instructions for approved substrates and additional application information before use.



      roofer kicking out the tpo membrane roll
      Step 1 - Kick out the roll

      step 2 - removing the release liner of the sa tpo membrane
      Step 2 - Remove the release liner
      step 3 - broom the sheet to remove wrinkles
      Step 3 - Broom in the sheet
      step 4 - roofer using  a weighted roller to smooth out the SA TPO Membrane
      Step 4 - Use a weighted roller
      step 5 - roofer welding the seams of the sa tpo self-adhered membranes together
      Step 5 - Weld the seams

      Learn how to install EverGuard® SA TPO Self-Adhered Roof Membrane today

      Get expert tips and techniques on the most effective way to install EverGuard® SA TPO Self-Adhered Roof Membrane from roofing veterans Dave & Wally in Roofing it Right.

      See how it compares

      to installation of GAF's non self-adhered smooth TPO membrane using other types of GAF adhesives.



      Watch how fast and easy it is to install*


      *Results based on a study conducted by Home Innovations Research Labs, an independent research lab, comparing installation of GAF's self-adhered TPO membrane to installation of GAF's non-self adhered TPO membrane using other types of GAF adhesives by an [affiliated/unaffiliated] contractor on a 29' x 42' deck in accordance with published application instructions for each product, under controlled laboratory conditions. Actual results may vary.

      Compare adhesive options

      Where to buy

      Find a commercial distributor near you.

      Find a contractor

      Find a GAF certified contractor near you.

      Get Support at Every Phase of Your Project

      PLANNING

      Get assistance with detail drawings and products
      GET STARTED

      PURCHASE

      Receive support from your local territory manager
      CONNECT

      DELIVERY

      Get delivery instructions or see status updates
      GET STATUS