POSTS BY Steve Maxwell
 
Avatar
Steve Maxwell

Steve Maxwell is an award-winning content creator who has published more than 5,000 articles, shot countless photos and produced video since 1988. Using his experience as a carpenter, builder, stone mason and cabinetmaker, he has created content for Mother Earth News, Reader's Digest, Family Handyman, Cottage Life, Canadian Contractor, Canadian Home Workshop, and many more. Steve lives on Manitoulin Island, Canada with his wife and children in a stone house he built himself. His website gets 180,000+ views each month, his YouTube channel has 58,000+ subscribers and his weekly newsletter is received by 31,000 subscribers each Saturday morning.

 
 
Showing page of
MORE FROM GAF ROOF VIEWS
Construction planning through to completion can be tricky to coordinate, especially within an urban area, which can present a range of complications. Building proximity, tall building heights, complex building structures, and densely populated areas are just a few challenges that can make it particularly difficult to consider traditionally heavy or large-sized materials when roofing or re-roofing a building.
Well-placed shingle nails are crucial for building top-performing roofs. When roofing nails are positioned improperly or driven incorrectly, the roofing system may become vulnerable to issues, such as punctures, buckling, sealing failures, blow-offs, and raised tabs. Ultimately, improperly installed nails result in lost time, lost labor, material waste, and callbacks for roofers.
When part of your building's roof has a flat section covered with a traditional low-slope roofing material (such as single-ply or modified bitumen membranes), while another part of the building's roof is steep-slope and covered with asphalt shingles, we refer to that as a "mixed roof."
Roof to wall flashing is critical to the performance of every single-ply roofing system. These transition points, where the flat part of the roofing system is tied into the parapet wall, are potentially vulnerable areas for water intrusion. Following the requirements for proper flashing can help ensure that the roof system offers better protection.
A typical PVC roofing system will consist of insulation board and membrane over the structural deck. As with other single-ply roofing systems, there are multiple ways to fasten the PVC roofing membrane.
Taking care of your health and your home are two of the most important ways to support ourselves and our families. Amparo Sancen understands this—and she excels at helping others do just that. She grew up in Mexico watching her mom, who struggled with health issues, navigate medical appointments and doctor visits. This early exposure to the sometimes complicated medical world inspired Amparo to find a career that would allow her to help others. Healthcare was a natural fit, driving her to take a first-aid course when she was 13 years old. Once out of school, Amparo began studying nursing but then moved to Atlanta before she could complete those studies. There, she began working as a nursing assistant—until she learned more about the roofing industry, that is.
This blog contains information created by a variety of sources, including internal and third party writers. The opinions and views expressed do not necessarily represent those of GAF. The content is for informational purposes only. It is not intended to constitute financial, accounting, tax or legal advice. GAF does not guarantee the accuracy, reliability, and completeness of the information. In no event shall GAF be held responsible or liable for errors or omissions in the content or for the results, damages or losses caused by or in connection with the use of or reliance on the content.

Interested in sharing or republishing our content? We kindly ask you to adhere to our guidelines.