StreetBond coatings

StreetBond pavement coatings bond to both asphalt and concrete surfaces to provide a durable, aesthetic finish that helps protect and extend the life of the pavement.

StreetBond SB 150

StreetBond SB 150 is a two-component advanced waterborne epoxy-modified acrylic coating designed for application on textured (stamped) or non-textured (flat) asphalt pavement. It can be used on concrete with proper surface preparation and primer. (Refer to StreetBond Installer’s Guides for additional information.) StreetBond SB 150 is formulated for use on both pedestrian and vehicular applications.

StreetBond SB 150AL

StreetBond SB 150AL is a two-component advanced waterborne epoxy-modified acrylic coating designed for application on textured (stamped) or non-textured (flat) asphalt pavement. StreetBond SB 150AL has a modified aggregate blend allowing for application with an airless sprayer. Its unique design allows it to maintain durability even when wet, and its flexibility, adhesion, and elongation allow for asphalt expansion and contraction without cracking. StreetBond SB 150AL can extend asphalt life by providing protection from the harmful effects of oxidation due to UV exposure and weathering.

StreetBond SB 120

StreetBond SB 120 is a two-component advanced waterborne epoxy-modified acrylic coating, and can be used on textured (stamped) pavement, non-textured (flat) asphalt pavement, and on concrete with proper surface preparation. (Refer to StreetBond Installer’s Guides for additional information.) It is formulated for use on pedestrian areas with low or no vehicular traffic.

DuraShield

DuraShield Solar Gray is formulated with advanced solar reflective technology to maximize pavement cooling with a low-glare gray color that provides durable aesthetics in vehicular applications.

StreetBond Pro 220

StreetBond Pro 220 is a liquid-applied, MMA (Methyl methacrylate) resin-based system that provides UV-stable color and anti-skid aggregates in a fast-curing formula. Typically, StreetBond Pro applications are rainproof in 30 minutes and stress-resistant in 2 hours. StreetBond Pro 220 is optimized for cycle lanes and low-volume, light-traffic applications.

StreetBond Pro 250

StreetBond Pro 250 is a liquid-applied, MMA (Methyl methacrylate) resin-based system that provides UV-stable color and anti-skid aggregates in a fast-curing formula. Typically, StreetBond Pro applications are rainproof in 30 minutes and stress-resistant in 2 hours. With StreetBond Pro 250’s heavier aggregate and higher application rate, provides durable, high-friction surfaces suitable for high-traffic vehicular applications.

Limited Warranty Information

Manufacturer warrants that the product contained in this container will be free from manufacturing defects that adversely affect its performance for 1 year following completion of installation on a sound pavement substrate, provided that the product is installed during the shelf life indicated on this label and in accordance with published application instructions.  Should defective material be found, Manufacturer will replace that portion of the product that peels, delaminates, or shows abnormal wear as a result of manufacturing defect or, at its sole option, provide the cash value of such replacement product.  There are no other product warranties, expressed or implied, including any implied warranties of merchantability or fitness for a particular use. Manufacturer is not liable for any consequential or incidental damages of any kind, including but not limited to interior and exterior damages.  Other exclusions may apply. See StreeBond® 1-year Limited Warranty at streetbond.com for complete coverage and restrictions.