Pitch Pocket System
M-Curb

Pitch Pocket System

Why M-Curb™ Pitch Pocket System?

Designed for use on asphaltic systems, this integrated three-component system provides a watertight, durable seal for difficult roof penetrations.

Benefits

  • Accommodates any size opening
  • Produces long-lasting results when system components are used
  • Provides a water-tight seal
  • Easy to install  

Installation*

  • Seal and prime penetration:  Apply a bead of M-Bond™ at the base of the penetration and then prime the penetration with M-Bond™ 3" so it shows 1" above the M-Curb™ after it is installed.
  • Choose the proper curb size: Allow a minimum of 1" clearance from the inside of the curb to the penetration.
  • Seal the edges of the curb:  Once the edges of the curb are sealed, the newly created pitch pocket is ready to be filled using the M-Thane™ Pourable Sealant.The sealant will be tack-free and water-tight typically in 30 minutes to one hour depending on outside weather conditions. 


*Refer to GAF’s published Data Sheet or Installation Guide for application and complete specification details.

Product Properties

Contact GAF Contact GAF
Professional Installation Find A Contractor
Pricing and Where to Buy DISTRIBUTORS & RETAILERS