EverGuard® TPO 45‑mil Fleece‑Back Membrane About

EverGuard® TPO 45‑mil Fleece‑Back Membrane Specs

EverGuard® TPO 45‑mil Fleece‑Back Membrane Docs

EverGuard® TPO 45‑mil Fleece‑Back Membrane Videos

Specifications (All Dimensions are Nominal)
Thickness Over Scrim15.8 mils (0.401 mm) (Nominal) [ASTM D7635]
Breaking Strength375 lbf x 330 lbf (559 x 492 kg/m) [ASTM D751 Grab Method]
Elongation at Break30% [ASTM D751]
Tear Strength90 lbf x 120 lbf (134 x 179 kg/m) [ASTM D751 8" x 8" (203 x 203 mm)]
Factory Seam Strength115 lbf (membrane failure) (171 kg/m) [ASTM D751]
Puncture Resistance>350 lb. (159 kg) [FTM 101C Method 2031]
Permeance0.08 Perms [ASTM E96]
Dimensional Change0.2% [ASTM D1204 @158° F (70°C), 6 hr.]
Water Absorption0.7% [ASTM D471 @158° F (70°C), 1 week]
Hydrostatic Resistance390 psi [ASTM D751 Method D]
Ozone ResistanceNo visible deterioration @ 7 x magnification [ASTM D1149]
Weather Resistance>20,000 KJ/(m².nm) at 340 nm [ASTM G155/D6878]
Heat Aging60 weeks [ASTM D573] | 100% [ASTM D573]
ColorsWhite, Tan, Gray
Full Roll Size10' x 100' (3.05 x 30.5 m) (1,000 sq. ft. [92.9 q.m])
Half Roll Size5’ x 100’ (1.52 x 30.5 m) (500 sq. ft.[46.5 sq.m])
Thickness.045" (1.14 mm) [ASTM D751]
Thickness Over Scrim: 15.8 mils (0.401 mm) (Nominal) [ASTM D7635]
Breaking Strength: 375 lbf x 330 lbf (559 x 492 kg/m) [ASTM D751 Grab Method]
Elongation at Break: 30% [ASTM D751]
Tear Strength: 90 lbf x 120 lbf (134 x 179 kg/m) [ASTM D751 8" x 8" (203 x 203 mm)]
Factory Seam Strength: 115 lbf (membrane failure) (171 kg/m) [ASTM D751]
Puncture Resistance: >350 lb. (159 kg) [FTM 101C Method 2031]
Permeance: 0.08 Perms [ASTM E96]
Dimensional Change: 0.2% [ASTM D1204 @158° F (70°C), 6 hr.]
Water Absorption: 0.7% [ASTM D471 @158° F (70°C), 1 week]
Hydrostatic Resistance: 390 psi [ASTM D751 Method D]
Ozone Resistance: No visible deterioration @ 7 x magnification [ASTM D1149]
Weather Resistance: >20,000 KJ/(m².nm) at 340 nm [ASTM G155/D6878]
Heat Aging: 60 weeks [ASTM D573] | 100% [ASTM D573]
Colors: White, Tan, Gray
Full Roll Size: 10' x 100' (3.05 x 30.5 m) (1,000 sq. ft. [92.9 q.m])
Half Roll Size: 5’ x 100’ (1.52 x 30.5 m) (500 sq. ft.[46.5 sq.m])
Thickness: .045" (1.14 mm) [ASTM D751]
Codes & Applicable Standards
FMFM approved
Miami-Dade CountyMiami-Dade County Product Control approved
SPRIYes
FM: FM approved
Miami-Dade County: Miami-Dade County Product Control approved
SPRI: Yes
Energy Rating
ENERGY STAR® Certified (U.S. only)Only valid in the USA
Title 24 (California Energy Commission)Yes
Miami 21 (Florida Building Code)Yes
CRRCCRRC rated
ENERGY STAR® Certified (U.S. only): Only valid in the USA
Title 24 (California Energy Commission): Yes
Miami 21 (Florida Building Code): Yes
CRRC: CRRC rated
Shipping and Packaging
Full Roll Weight270 lb. (122 kg)
Half Roll Weight144 lb. (65 kg)
Full Roll Weight: 270 lb. (122 kg)
Half Roll Weight: 144 lb. (65 kg)

      TPO Training and Education

      Take advantage of industry-leading training and education though CARE - The Center for the Advancement of Roofing Excellence.
      Roofing It Right with Dave and Wally

      Roofing It Right with Dave and Wally

      When you’re facing your next low-slope roofing challenge, you’re going to wish you had Dave and Wally up there with you. These two consummate roofing pros bring three important tools to every job: experience, ingenuity and a sense of humor.
      Watch the videos

      Where to buy

      Find a commercial distributor near you.

      Find a contractor

      Find a GAF certified contractor near you.

      Get Support at Every Phase of Your Project

      PLANNING

      Get assistance with detail drawings and products
      GET STARTED

      PURCHASE

      Receive support from your local territory manager
      CONNECT

      DELIVERY

      Get delivery instructions or see status updates
      GET STATUS