EnergyGuard NH Ultra Polyiso Insulation About

EnergyGuard NH Ultra Polyiso Insulation Specs

EnergyGuard NH Ultra Polyiso Insulation Docs

EnergyGuard NH Ultra Polyiso Insulation Videos

Specifications (All Dimensions are Nominal)
Board Size4' x 4' (1.21 m x 1.21 m); 4' x 8' (1.21 m x 2.44 m)
Service Temperature Limits-100 to 200°F | (-73.3 to 93.3°C)
Dimensional Stability<2% - 7 days @158°F (70°C), 97% RH [ASTM D2126]
Tensile Strength≥500 | (23.9) [ASTM C209]
Water Absorption by volume (max)1.5 max [ASTM C209]
Moisture Vapor Transmission (perms)<1.5 perm | (57.5ng/Pa•s•m²); [ASTM E96] | (Procedure A)
Flame Spread Index (ASTM E84)<75 (1)(2) [ASTM E84]
Smoke Developed (ASTM E84)<200 (1) [ASTM E84]
Board Size: 4' x 4' (1.21 m x 1.21 m); 4' x 8' (1.21 m x 2.44 m)
Service Temperature Limits: -100 to 200°F | (-73.3 to 93.3°C)
Dimensional Stability: <2% - 7 days @158°F (70°C), 97% RH [ASTM D2126]
Tensile Strength: ≥500 | (23.9) [ASTM C209]
Water Absorption by volume (max): 1.5 max [ASTM C209]
Moisture Vapor Transmission (perms): <1.5 perm | (57.5ng/Pa•s•m²); [ASTM E96] | (Procedure A)
Flame Spread Index (ASTM E84): <75 (1)(2) [ASTM E84]
Smoke Developed (ASTM E84): <200 (1) [ASTM E84]
Codes
FBCState of Florida Approved
FMFM Approval
HPDYes
Miami-Dade CountyMiami-Dade County Product Control Approved
PIMA Quality MarkPIMA Quality Mark
FBC: State of Florida Approved
FM: FM Approval
HPD: Yes
Miami-Dade County: Miami-Dade County Product Control Approved
PIMA Quality Mark: PIMA Quality Mark
Testing Methods & Applicable Standards
ASTM C1289 Type IIYes
ASTM C1289 Type II: Yes

      Where to buy

      Find a commercial distributor near you.

      Find a contractor

      Find a GAF certified contractor near you.

      Get Support at Every Phase of Your Project

      PLANNING

      Get assistance with detail drawings and products
      GET STARTED

      PURCHASE

      Receive support from your local territory manager
      CONNECT

      DELIVERY

      Get delivery instructions or see status updates
      GET STATUS