Key Roofing Danger Signals


Key Danger Signals

Don’t get caught with sudden, costly repairs. Keep a close eye on your roof and find out how to spot problems - including these 7 key danger signs - before they severely impact your wallet.

A leak in the attic.

After a strong storm or wind-driven rain, take a look in the attic for signs of leaking. It could indicate damaged shingles, inadequate underlayment or deteriorated flashing. 

A leak in the attic.
Blistering or peeling interior or exterior paint.

Blistering or peeling interior or exterior paint.

Moisture trapped in the house due to poor ventilation can cause exterior paint to peel and blister. 

Stains on interior ceilings and walls - mold or mildew growth.

Stains, or worse, mold, can be caused by leaks from outside the house or moisture trapped inside. 

Stains on interior ceilings and walls - mold or mildew growth.
Exterior decay in sheathing and/or siding.

Exterior decay in sheathing and/or siding.

Excess moisture can also contribute to decay.

Missing, cracked, or curled shingles.

Dry, cracked, or easily broken shingles have reached the end of their useful life, and it’s time to invest in a new roof.

Missing, cracked, or curled shingles.
Dark, “dirty-looking” areas on your roof.

Dark, “dirty-looking” areas on your roof.

Vegetation, fungus, mold, or algae growth can cause dark stains on your shingles. That doesn’t necessarily mean you need a new roof, but if you do choose to replace your shingles, ask for StainGuard® protection — available on many GAF Shingles, including Timberline® Cool Series Shingles, Timberline® Natural Shadow® Shingles, Timberline® ArmorShield™ II Shingles, and Timberline® Ultra HD® Shingles.

(StainGuard® protection is available only on shingles with StainGuard® -labeled packaging. See GAF Shingle & Accessory Ltd. Warranty for complete coverage and restrictions.)

Excessive energy costs.

Inadequate ventilation can possibly drive up your household cooling costs by trapping hot air in the attic. Attic moisture can also drip into your insulation, reducing its effectiveness. 

Excessive energy costs.

How to Inspect for Damage

Why wait for the drip, drip, drip of a damaged roof It’s a good idea to inspect your roof regularly, particularly if you live in areas of the country that experience extreme weather. You can inspect your roof yourself by either climbing on your roof or by using binoculars from the ground.

If you choose to go up on the roof yourself, remember to always utilize proper safety equipment to prevent falls or injury. See our Safety section for more details.

Here are some things to look for:

  • Check flashing for damage or inadequate coverage

  • Look under eaves and overhangs for damage

  • Examine shingles for any that are missing, cracked, curled, torn, or warped

  • Look for any open seams or joints

  • Look for popped or rusted nails or stains around nails

  • Look for signs of insects or critter infestation (squirrels love climbing on roofs)

  • Check for  sagging or unsound areas

  • Check for rotten fascia and eaves

  • Inspect your sources of roof ventilation to make sure they are not clogged

  • Inspect gutters for sagging or signs of leaks and be sure to remove any leaves or debris

  • Check for dark patches or biological growth

  • Check around pipes and roof penetrations to make sure they are sealed and in good shape – there shouldn’t be any exposed nails around flashings (if so, they should be sealed)

  • Look inside the attic for signs of leaks, dark spots, holes, or sagging sheathing

You can do all this yourself, but if you’re uncomfortable with the idea of walking around on your roof or climbing a ladder in the first place, or you just want a professional inspection done, your best option is always to find a GAF factory-certified Master Elite® Contractor near you.

Find a GAF Master Elite® Roofing Contractor

Find factory-certified Master Elite® Contractors for your roofing job.
Contact GAF
Find A Contractor