Protecting Your Building from Hail Roof Damage

By Dawn Killough 05-13-2022
QUICK SHARE
Tag Icon

Up to 25% of the United States experiences large hail episodes—and when they do, hail can cause severe damage to roofs and the HVAC equipment stored there. Hailstorms account for 70% of the average annual property losses from severe convective storms in the US. Building owners can protect their buildings and equipment by designing their buildings and roofs to withstand the damage caused by large hailstones.

FM Global, an insurance company that specializes in loss prevention and testing, provides a standard for testing and approving assemblies that provide greater hail resistance. Building owners and designers often rely on FM Global's resources to specify desired roofing assemblies and construction methods. These resources include RoofNav assemblies from FM Approvals as well as loss prevention data sheets and Approvals Standards. Well-maintained roofs that meet FM's hail testing and approval requirements are better equipped to protect buildings from hail and water damage that occurs during storms.

Assessing Risks from Hail Roof Damage

Hail can cause physical damage to a building's roof and the equipment stored there, including dents, cracking, mineral loss on modified bitumen sheets, and compound delamination. Older roofs or those in poor condition may be more susceptible to damage from hail. Roof equipment, including cooling fins and condenser coils, can also be damaged from falling hail. Skylights are subject to hail punctures, which are the main cause of water damage to buildings and their contents.

In the US, the most severe hail generally occurs in the Midwest and central contiguous states. According to FM, very severe hail can be found in the region from North Dakota to Texas and Colorado to Missouri. Roofs, roof assemblies, and equipment in this region should be designed to meet FM's specific hail requirements to better withstand hail roof damage.

Defining Very Severe Hail

FM Approvals has recognized three classes of hail: moderate, severe, and very severe.

Moderate hail (MH) is less than 1.75 inches in diameter, which is about the size of a cherry. Severe hail (SH) is 1.75 inches to 2 inches in diameter, similar in size to a golf ball. Very severe hail (VSH) is 2 inches or greater in diameter, similar in size to a billiard ball (or larger).

FM's Very Severe Hail (VSH) certification was added in 2016 based on data from the National Oceanic and Atmospheric Administration's National Weather Service and National Center for Environmental Protection's Storm Prediction Center. This data showed a concentration of reports of hail larger than 2 inches in diameter in the very severe hail region.

Passing a Very Severe Hail Test

FM tests assemblies in accordance with FM 4470:

  • To test an assembly for moderate hail, a 2-inch-diameter steel ball weighing 1.19 pounds is dropped from 81 inches above the assembly. Two samples, unweathered and weathered, are tested 10 times each. This test provides an impact energy of 8 foot-pounds.
  • Testing for severe hail, the same 2-inch-diameter steel ball is dropped from a height of 141.5 inches above the assembly. This test provides an impact energy of 14 foot-pounds.
  • When testing whether a roof assembly can withstand very severe hail, a 2-inch-diameter preformed ice ball is launched at the assembly using compressed air. Three samples are used in this test: one unconditioned, one UV weathered, and the third UV weathered and heat aged for 42 days prior to testing. This test provides an impact energy of between 53 and 58 foot-pounds.

After the test is performed, the roof assembly is inspected for dents, cracking, and delamination. Assemblies that pass the test are certified as meeting the FM criteria. You can find an online database of VSH-rated roofing assemblies here; GAF has over 1600 single ply VSH-listed assemblies.

The FM standard recommends that building owners inspect their roofs on a regular basis and repair deficiencies; the standard also advises replacing roofs where deficiencies cover a large area or when the roof is nearing the end of its useful life. An owner should also inspect heat and smoke vents and skylights for cracking, yellowing or discoloration, cloudiness, or other indications of damage due to weathering and aging. Skylights showing damage should be replaced as needed, and hail guards on HVAC equipment require inspections to ensure they are in place and free of damage.

For more information about GAF and very severe hail, contact your local roofing contractor or complete our very severe hail contact form.

ABOUT THE AUTHOR
Dawn Killough is a freelance writer in the construction, finance, and accounting fields. She is the author of an ebook about green building and writes for construction tech and green building websites. She lives in Salem, Oregon with her husband and four cats.
Don't miss another GAF RoofViews post!
LATEST UPDATES
Ventilation is defined by the U.S. Department of Energy as "the exchange of indoor and outdoor air." This sounds simple enough, but if your home's attic is not properly ventilated, excess heat and moisture cannot escape and can lead to a plethora of concerns for your home, your roof, and your wallet.
Think that your roof doesn't need protection against hail? Think again. Severe hail events are increasing in geographic footprint and are no longer just in hail alley. The geographic region that experiences 1 inch or larger hailstones has expanded to be nearly two-thirds of the United States. Nearly 10 percent more U.S. properties, more than 6.8 million, were affected by hail in 2021 than in 2020. Coinciding with the increase in properties affected by a damaging hail event in 2021, there was also an increase in insurance claims, which rose to $16.5 billion from $14.2 billion in 2020.
To get a firsthand account of what it's like to be a roofer, GAF spoke with Trenton Wisecup, president of Arrow Roofing Services in Michigan, and David Laurain, Arrow Roofing's vice president, to learn about their experiences in the roofing industry.
Historically, commercial skylights have gotten a bad rap. "The old joke was: 'if it's not leaking now, it will be soon,'" says Brian Grohe, a 13-year vet of the skylight industry and a commercial sales manager at industry leader VELUX. Fortunately, technology has changed that old tune for the better, turning commercial skylights into a golden opportunity for roofing contractors.
Around the globe, excess heat collects in urban areas and can contribute to increased heat-related death and illness, diminished quality of life, and reduced economic opportunities. Such areas are known as "urban heat islands." Fortunately, cooling strategies are now available and being used in initiatives like the GAF Cool Community project to help mitigate urban heat island effects. Such cooling strategies are supported by products such as such as GAF StreetBond® pavement coatings with Invisible Shade™ — named by TIME magazine as one of its Best Inventions of 2022.
The GAF manufacturing plant in Tuscaloosa, Alabama sits just a half mile away from Stillman College, a historically Black university with a rich history in the area. The school was first formed as the Tuscaloosa Institute in 1875 by the Presbyterian Church to serve as a ministerial training academy for Black men. It was renamed in 1899 — after the director whose idea it was to found the academy — Rev. Dr. Charles Allen Stillman.
This blog contains information created by a variety of sources, including internal and third party writers. The opinions and views expressed do not necessarily represent those of GAF. The content is for informational purposes only. It is not intended to constitute financial, accounting, tax or legal advice. GAF does not guarantee the accuracy, reliability, and completeness of the information. In no event shall GAF be held responsible or liable for errors or omissions in the content or for the results, damages or losses caused by or in connection with the use of or reliance on the content.

Interested in sharing or republishing our content? We kindly ask you to adhere to our guidelines.