Six Truths About Cool Roofs

By GAF Roof Views 06-11-2021
QUICK SHARE
Tag Icon

Cool roofs can help save you money on energy bills* in the North as well as the South. Here are some cool truths to ponder when planning a new roof.*

TRUTH 1: It's All About Reflectivity

A cool roof reflects the sun's rays away from the roof, helping to reduce rooftop temperatures. While a sunlight-absorbing black roof can reach up to 190°F in the summer, a reflective roof's temperature can be as much as 55°F lower. Dark surfaces also contribute to the urban heat island effect. (SOURCE: heatisland.lbl.gov/coolscience/cool-roofs)

A cool roof reflects away the sun's rays, unlike a dark roof which absorbs them and transfers heat to the building below.

About Heating & Cooling Degree Days:

These units of measure describe how far the average daily temperature varies from a baseline of 65°F. Temperatures greater than 65°F are cooling-degree days, because we need to cool the environment back to 65°F. Heating-degree days occur when the temperature falls below 65°F.

TRUTH 2: On Average, Electricity Costs Up to 4 Times More, Per BTU, Than Natural Gas

If your building uses electric air conditioning and natural gas heat, a cool reflective roof can help lower your cooling costs* no matter where you are in the continental United States (including Northern States) by reducing the amount of air conditioning needed.

On average, electricity costs up to 4 times more, per BTU, than natural gas. Not only is electricity more expensive than gas, but the rate structures are more complex. Seemingly small increases in electricity use can result in large additional costs due to the compounding effects of time of demand charges based on a few peak minutes of electricity usage during each billing period.

How much could you be saving on energy bills? Find out by trying out our CREST energy calculator.

What are "Demand Charges?"

Simply put, demand charges are the immediate usage put on your energy system. Some electric companies charge commercial and industrial buildings a demand charge penalty based on a few peak minutes of electricity usage during each billing period. Buildings that use the most electricity at one time often get charged the largest penalty, which can be up to 30 -70% of their total electricity bill. Air conditioners, by their nature, surge electricity demand at peak times of the day. Cool roofs can help reduce the air conditioning needed by your building by eliminating the extra heat that would be absorbed by a black roof.

TRUTH 3: Dark Roofs Increase the Need for Air Conditioning

Dark roofs not only drive up monthly electricity-consumption costs, they can significantly increase demand charges as well. Less demand can mean less money spent to cool the building.*

TRUTH 4: A Black Roof Covered in Snow is White

Your roof's potential impact on building energy usage is based on the amount of sunlight reaching it, not on the ambient temperature. So even in regions with more "heating degree days" than "cooling degree days" a reflective cool roof can offset more hours of sunlight in summer than a dark roof can absorb to heat the building in winter; almost twice as many at the solstices. And, of course, during those long winter nights, sunlight is having no effect on your roof at all. Add to that the fact that a dark roof covered in snow is, effectively, a white reflective roof. A snow-covered black roof reflects the sun's rays but in the summer, it can become a heat-absorbing sponge.

Truth 5: A Properly Designed Roof Reduces the Risk of Condensation

A properly designed roof can offset condensation in a variety of ways, including using multiple layers of insulation with staggered joints, installing GAF SA Vapor Retarder, or installing a fully adhered system, to just name just a few options.

Truth 6: Cool Roofs are Changing the Roofing Industry

Commercial buildings are benefiting from cool roof savings throughout the USA, even in Northern climates, and that is fundamentally shifting the roofing marketplace. For example, EPDM was the most popular single-ply membrane in the industry in 2003. Today, TPO makes up over 50% of the single-ply market.

GAF offers a wide range of cool roofing technologies including:

Single-Ply — available in both TPO and PVC, single-ply membranes are among the most commonly installed roofing technologies due to the speed of installation and the variety of systems available.

Asphaltic — available in BUR, APP, and SBS, asphaltic systems are great, time-tested multi-ply systems that can be installed in a variety of systems.

Coatings — available in acrylics, silicones, urethanes, PMMAs, and PVDFs, the GAF line of coatings can preserve and restore existing roofs.

For more information on maintenance plans, guarantee extension details, or to be connected with a GAF maintenance professional, please visit our building owner and property manager resources page.



*Energy cost savings are not guaranteed and the amount of savings may vary based on climate zone, utility rates, radiative properties of roofing products, insulation levels, HVAC equipment efficiency, and other factors.

ABOUT THE AUTHOR
More homes and businesses in the U.S. are protected by a GAF roof than by any other product. We are the leading roofing manufacturer in North America, with plants strategically located across the U.S. As a Standard Industries company, GAF is part of the largest roofing and waterproofing business in the world.
Don't miss another GAF RoofViews post!
LATEST UPDATES
Taking on a new roofing project means collecting plenty of information before you even consider stepping foot in a roofing supply store. The key is to ask the right questions—and know how to find the answers you need.
In 2011, employees at the GAF Chester plant in Rock Hill, South Carolina had an idea to reduce waste being generated by the manufacturing facility. The initial idea has grown into a model of collaboration and innovation: reusing cardboard mat cores.
Introduction Wind design of roof systems can be confusing from an engineering perspective. Wind design can also be confusing because the International Building Code (IBC) provides specific requirements, but so does Factory Mutual (FM). If FM is specified, do the IBC requirements need to be followed? What is the wind-design strategy for FM-insured and non-FM-insured buildings? This blog will discuss the following:
Whether it's a minor roof repair or complete replacement, home improvement projects can be a big expense for homeowners. That's why it's so important for contractors to consider accepting credit card payments in addition to other flexible payment options they may offer.
Has a hurricane caused roof damage on your home? 2020 saw a record-breaking 30 named hurricanes, causing more than $51 billion in damages. Preparation can begin before any hint of a storm. Here's how to make a plan for your roof, and identify hurricane roof damage should you get hit by a storm.
Your roofing system is made up of protective layers, designed with the latest technological advances to shield your home from ice and water- keeping your roof deck dry and safe. One of these layers is called a leak barrier, which is often referred to as ice and water shield. Located below the shingles, it's crucial to your roof system's defense against moisture.
This blog contains information created by a variety of sources, including internal and third party writers. The opinions and views expressed do not necessarily represent those of GAF. The content is for informational purposes only. It is not intended to constitute financial, accounting, tax or legal advice. GAF does not guarantee the accuracy, reliability, and completeness of the information. In no event shall GAF be held responsible or liable for errors or omissions in the content or for the results, damages or losses caused by or in connection with the use of or reliance on the content.

Interested in sharing or republishing our content? We kindly ask you to adhere to our guidelines.