United Coatings Rhino Top Textured Coating


Description

Rhino Top Smooth / Rhino Top Textured is a high quality, water-based acrylic coating that incorporates an epoxy additive to increase its abrasion resistance. A special spherical silica sand is suspended in the textured version to provide a fine uniform non-skid finish. Rhino Top provides a durable colored topping for horizontal surfaces.


Sizes Available:

1 gallon (3.8 liter) can
5 gallon (19 liter) pail


Colors Available:

Brownstone, Burlap, Concrete Gray, Flint Gray, Sandstone, Terra Cotta, Turf Green


Basic Uses & Advantages

Rhino Top was specifically developed for use over concrete, masonry, stucco, plaster and asphalt. Its epoxy-modified acrylic finish is designed to resist abrasion, weathering and moisture degradation. Rhino Top is recommended for use on recreational courts, walkways, pool decks, tennis courts, patio decks and floors. It provides a finely textured, weather-resistant colored finish on surfaces. In addition, Rhino Top may be used over roof coatings to delineate walkways and service areas, as well as to incorporate non-skid properties.

Rhino Top can also be used in combination with Elastuff 101 Basecoat on applications requiring a waterproof membrane topcoated with a non-skid colored finish. This system is particularly effective on above grade tennis courts and recreational decks as well as balconies and lanais.

Advantages

  • Single package, water-based system for ease of application and cleanup.

  • Bonds tenaciously to concrete, masonry and asphalt surfaces.

  • Resists ultraviolet degradation for long-term protection and color stability.

  • Provides durable, non-skid texture on interior or exterior surfaces.

  • Resists wear and abrasion through the incorporation of an epoxy additive.

  • Protects against asphalt degradation by sealing in the vital oils of the asphalt mix.

  • Helps prevent dusting and spalling of concrete surfaces.

  • Surfaces resist penetration from general soils, motor oils and gasoline for ease in cleaning

  • No toxic fumes or objectionable odor; meets most VOC requirements.


Physical Properties

RHINO TOP
Solids by Weight Smooth: 48.9% [ASTM D2369]
Textured: 59.2% [ASTM D2369]
Solids by Volume Smooth: 34.3% [ASTM D2697]
Textured: 41.3% [ASTM D2697]
Weight per Gallon 10.5 lbs. (4.8 kg) (±.5)
Flash Point >200°F (93°C) [ASTM D3278]
Gloss 2.5 (60° Gardner) [ASTM D523]
Hardness 3H pencil [ASTM D3363]
Temperature Limit
for Normal Service
-30°F to 150°F (-34°C to 66°C)
VOC < 100g="">L
Dry Time 30 min to touch, 1–2 hours for recoat
@75°F (24°C), 50% RH [ASTM D1640]
Cure Time* 48 hours @ 75°F (24°C), 50% RH
[ASTM D1640]
*high humidity and/or low temperature will
retard cure and recoat times
Standard Colors Flint Gray, Concrete Gray, Smoke Gray,
Burlap, Sandstone, Brownstone, Tile
Red, Turf Green, Black, and White



Documents

All documents are U.S. English unless otherwise noted

Commercial Roofing EagleView Commercial Property Owners Portal Architects And Specifiers Green Roof Central




   





 
Product Princing and Where to Buy