Elastomeric Roofing - TOPCOAT XR-2000 Kynar Coated Metal

XR-2000



Description

XR-2000 Primer is a white, water-based, acrylic primer designed to enhance the adhesion of acrylic coatings to Kynar® coated metal. Due to the wide variety of preapplied finishes, suitability of XR-2000 Primer must be tested on an individual basis.


Uses

XR-2000 Primer is designed to enhance the adhesion of acrylic coatings to prefinished metal roofing, including those containing fluoropolymers such as Kynar® or siliconized polyesters.


Advantages
  • Non-flammable, VOC compliant and easy clean up

  • Good adhesion to factory coated metal roofing

  • Has rust inhibiting properties


Sizes Available

  • 5 gallon pail

Physical Properties
XR-2000 Technical Data
Application Rate: 0.75 gallons/100 sq. ft.
Application Method: Airless sprayer or roller
Application Temp (air, surface): 42°F – 120°F
Drying Time (75°F, 50% RH): Approximately 6 hours
Wet Mil Thickness: 12 wet mils
Dry Mil Thickness: 5 dry mils
Total Solids (by weight): 52.5% ± 1%
Total Solids (by volume): 40% ± 1%
Specific Gravity: 1.22 ± 0.1
Weight per Gallon: 10.2 ± 0.5 lbs
Viscosity (75°F): 3,500 ± 350 cps
Storage: Store in well-ventilated area at 50°F to 80°F; protect from freezing
Shelf Life: 1 Year
Clean-up: Water before curing

Documents

All documents are U.S. English unless otherwise noted

Commercial Roofing EagleView Commercial Property Owners Portal Architects And Specifiers Green Roof Central




   





 
Product Princing and Where to Buy