HYDROSTOP® HydroCap Fastener Fabric


Description

HydroCaps Fastener Covers are circular pieces of material that are non-woven 100% polyester, stitch bonded, heat set and designed for reinforcing the PremiumCoat® System around metal fasteners.



Uses & Advantages

HydroCap Fastener Covers are designed for use in conjunction with the PremiumCoat® System. They act as a reinforcing material, increasing the long-term strength of either system. It also allows the stresses of normal building movement to be spread over a wider area.

HydroCaps are circular pieces of material that are non-woven 100% polyester, stitch bonded, heat set and designed for reinforcing the PremiumCoat® System around metal fasteners.


Physical Properties

HYDROCAP FASTENER COVERS
Outside Diameter 4 in (10.16 cm)
Inside Diameter 3/8 in (0.95 cm)
Weight 3 oz/yd² (106.31 g/m²)
Tensile Strength Warp: 74 lbs (33.60 kg),
Fill: 45 lbs (20.43 kg) [ASTM D5034]
Thickness 0.018 inches (0.457 mm)
[ASTM D1777]
Elongation at Break Warp: 21.3%, Fill: 51.3%
[ASTM D5034]
Ball Burst 111 lbs (50.39 kg) [ASTM D3787]
Trapezoid Warp: 13.5 lbs (6.13 kg), Fill: 24.2 lbs
(10.99 kg) [ASTM D117]

Documents

All documents are U.S. English unless otherwise noted

Commercial Roofing EagleView Commercial Property Owners Portal Architects And Specifiers Green Roof Central




   





 
Product Princing and Where to Buy