|
|
||||||||||||||||||||||||||||||||||||||||||||
|
Cobra Exhaust Vent
Product Information |
Cobra Exhaust Vent
Instructions,
Data Sheets, Warranties, & Codes |
Cobra® Exhaust Vent for Roof Ridge
|
Effective attic ventilation is critical
for a long-lasting roof!
Cobra® Exhaust Vent is a key part of the GAF Lifetime Roofing System, and has even earned the prestigious Good Housekeeping Seal. (See Details)
Homeowner’s Best Choice
|
Professional’s Best Choice
 
Texas Department of Insurance Product Evaluation RV-19
Florida Building Code ICC-ES-ESR 1265 |
The GAF Lifetime Roofing System has earned the prestigious Good Housekeeping Seal,
which means that Good Housekeeping stands behind the products in this system. (Refer
to Good Housekeeping Magazine for its consumer protection policy.)
See GAF Shingle & Accessory Ltd. Warranty for complete coverage and restrictions.
The word "Lifetime" means as long as the original individual owner of
a single family detached residence (or the second owner in certain circumstances)
owns the property where the shingles and accessories are installed. For owners/structures
not meeting above criteria, Lifetime coverage is not applicable. Lifetime ltd. warranty
on accessories requires the use of at least three qualifying GAF accessories and
the use of Lifetime Shingles.
Balanced Ventilation Requirements
Balanced ventilation requires an equal amount of intake ventilation and exhaust ventilation. GAF recommends, at a minimum, providing 1 square foot of Net Free Ventilation for every 300 square feet of attic floor space. Consult local building codes for specific ventilation requirements in your area.
- Calculate the total square footage of the attic floor area (round up to the next highest number). This number will determine the minimum total linear feet of Cobra® Exhaust Vent that is needed.
- Find the appropriate amount of Cobra® Exhaust Vent and minimum intake ventilation that corresponds to the total attic square footage.
|
Based on 1/300 Rule
|
||
|
Total Attic
Square Footage |
Recommended Length of
Cobra® Exhaust Vent (Feet) (See Details) |
Minimum Intake Ventilation
(Net Free Area in Sq. In.) (See Details) |
|
1600
|
23/28
|
389/395
|
|
1900
|
27/33
|
457/466
|
|
2200
|
32/38
|
541/536
|
|
2500
|
36/43
|
609/607
|
|
2800
|
40/48
|
676/677
|
|
3100
|
45/53
|
761/748
|
|
3400
|
49/58
|
829/818
|
NOTE: Always have a balanced ventilation system. In no case should the amount of exhaust ventilation at the ridge exceed the amount of soffit ventilation.
Documents
-
Brochures & Data Sheets
-
Cobra® Exhaust Vent - Sell Sheet
01/01/2012 -
Cobra® Exhaust Vent Vs. The Competition
01/11/2011 -
GAF Ventilation Brochure
03/08/2012 -
Green Roofing Solutions Brochure
02/17/2010 -
Residential Roofing Full Line Brochure
01/01/2012 -
Steep Slope Green System Brochure
09/09/2011
-
Cobra® Exhaust Vent - Sell Sheet
-
Warranty Information
-
GAF Shingle & Accessory Warranty
01/11/2012 -
GAF Shingle & Accessory Warranty - French Version
01/11/2012 -
GAF Shingle & Acessory Warranty - Spanish Version
01/11/2012 -
Golden Pledge® Limited Warranty
01/11/2012 -
System Plus Limited Warranty
01/11/2012
-
GAF Shingle & Accessory Warranty
-
Application Instructions
-
Cobra® Hand Nail - Application Instructions
07/01/2008 -
Cobra® Nail Gun Adapter - Application Instructions
09/01/2008 -
Cobra® Nail Gun- Application Instructions
06/01/2008
-
Cobra® Hand Nail - Application Instructions
-
Code - Miscellaneous
-
Codes - TDI Evaluation Reports
-
Codes - Florida Building Code Reports
-
Cobra® - Florida Approval FL6267-R4
01/31/2012
-
Cobra® - Florida Approval FL6267-R4
-
Codes - ICC Reports
-
Codes - Miami Dade NOAs
-
Material Safety Data Sheet (MSDS)
-
Cobra® Exhaust Vent - MSDS #1016
05/01/2003
-
Cobra® Exhaust Vent - MSDS #1016
Cobra® Exhaust Vents
Are
|
|
|
|
YOU
GET:
|
||
|
||
