PVC Roofing - EverGuard PVC Accessories

EverGuard® PVC Accessories

PVC Roofing Components

The GAF EverGuard® PVC single-ply roofing system includes an extensive line of EverGuard® PVC flashing accessories for use with EverGuard® PVC roofing systems. EverGuard® flashing accessories are heat welded to the EverGuard® roofing membrane. They are easy to install and provide secure protection from roof edge to parapet to penetration to wall. The following EverGuard® PVC flashing accessories are available in standard colors of white and gray:

Boots

Vent Boot

Inside Corner

Description

  • 70 mil molded membrane

Benefit/Application

  • One standard size accommodates most common pipes and conduits
  • Supplied with stainless-steel clamping rings

Quantity/Size

  • Fits 1” - 6” diameter pipes
  • 8 Vent Boots per carton

Weight

  • 10.2 lbs/carton

Corners

Preformed Inside Corner

Inside Corner

Description

  • Molded PVC un- reinforced membrane

Benefit/Application

  • For use in flashing inside corners of base and curb flashings

Quantity/Size

6 Boots/Carton
  • 2-3/4” x 3.5” with 6’ flange
  • 20 corners/carton

Weight

  • 1.8 lbs/carton

Universal Corner

Inside Corner

Description

  • Molded to 70 mil thickness from PVC

Benefit/Application

  • One standard size
  • Can be cut to accommodate use as either an inside or outside corner reinforcement

Quantity/Size

  • Corner Size: 3" x 3” with flange
  • 20 corners/carton

Weight

  • 10.2 lbs/carton

Flashing & Rolls

Expansion Joint Covers

Joint Cover Patches

Description

  • .060” thick reinforced membrane with foam supported bellows

Coated Metal Sheets

Description

  • 24 gauge steel with .040” thick membrane film

Benefit/Application

  • PVC un-reinforced membrane is laminated to galvanized sheet metal
  • Cuts and forms like standard sheet metal.
  • Field and flashing membranes heat weld directly to coated metal
  • For metal gravel stops, and drip edges; metal base and curb flashings; sealant pans and scupper sleeves

Quantity/Size

  • 4’ x 10’ sheets
  • 10 sheets/pallet
  • 30 sheets/pallet (White Only)

Weight

  • 520 lbs/pallet
  • 1560 lbs/pallet

UN-80 T-Joint Cover Patches

Joint Cover Patches

Description

  • .080” thick un-reinforced membrane: white/gray and white/tan

Benefit/Application

  • Conforming membrane seal over t-joints in 80 mil membrane applications

Quantity/Size

  • 6-3/4” diameter
  • 100 patches/carton

Weight

  • 9.3 lbs/carton

UN-55 24" Detailing Membrane

Detailing Membrane

Description

  • .055” thick un-reinforced membrane: white/gray and white/tan

Benefit/Application

  • Alternative flashing material for penetrations and corners
  • Required wherever preformed vent boots can not be used

Quantity/Size

  • 24” x 50’ roll

Weight

  • 40 lbs/roll

Other

Walkway Rolls

Description

  • 1/8” thick (125 mil) extruded and embossed PVC

Benefit/Application

  • Herringbone traction surfacing in gray color
  • Available in both pads and rolls
  • Heat welds directly to membrane

Quantity/Size

Pads
  • 30” x 36”; 30 pads/carton
Rolls
  • 30” x 50’

Weight

  • 8 lbs/pad or 118 lbs/roll

Pourable Sealer Pocket

Detailing Membrane

Description

  • Molded PVC un- reinforced membrane

Benefit/Application

  • Perfect for irregular roof penetrations
  • Fill with EverGuard® PVC pourable sealer or TOPCOAT® FlexSeal™ for the perfect finish

Quantity/Size

  • 6 Pockets per carton
  • 12” x 15¼” x 4” oval

Weight

  • 9.5 lbs/carton

Storage

Store accessory flashing materials in original cartons, rolls or sheets on pallets or shelving, in a dry area.

Documents

All documents are U.S. English unless otherwise noted

Commercial Roofing EagleView Commercial Property Owners Portal Architects And Specifiers Green Roof Central




   





 
Product Princing and Where to Buy