EverGuard^® TPO Accessories

TPO Roofing Components

The GAF EverGuard^® TPO single-ply roofing system includes an extensive line of EverGuard^® TPO flashing accessories for use with EverGuard^® TPO roofing systems. EverGuard^® flashing accessories are heat welded to the EverGuard^® roofing membrane. They are easy to install and provide secure protection from roof edge to parapet to penetration to wall. The following EverGuard^® TPO flashing accessories are available in standard colors of white, gray and tan unless otherwise noted.

Preformed Vent Boots

Description 75 mil molded membrane Benefit/Application One standard size accommodates most common pipes and conduits boots can not be used Supplied with stainless steel clamping rings Quantity/Size Fits 1” - 6” diameter pipes 6 Vent Boots per carton Weight 9 lbs/carton

Preformed Corners

Description 60 mil thick molded membrane Benefit/Application Universal style corner accommodates both inside and outside corners of base and curb flashings Quantity/Size 4 x 4” with 6” flange 20 Corners per carton Weight 6 lbs/carton

UN-55 Detailing Membrane

Description 55 mil thick unreinforced membrane White, Tan, Gray, Regal Red, Regal Blue, Hartford Green (Energy Tan in the West) Benefit/Application Alternative flashing/reinforcement material for penetrations and corners Required wherever preformed vent boots cannot be used Quantity/Size 24” x 50’ roll Weight 28 lbs/roll

TPO 45 mil Utility Flashing Strip

Description 45 mil thick reinforced membrane White, Tan, Gray, Regal Red, Regal Blue, Hartford Green (Energy Tan in the West) Benefit/Application Use for stripping in coated metal flanges Quantity/Size 8” x 100’ roll Weight 18 lbs/roll

Coated Metal Sheets

UN-55 T-Joint Cover Patches

Description 55 mil thick unreinforced membrane Benefit/Application Conforming membrane seal for use over T-Joints in 60 and 80 mil membrane applications Quantity/Size 100 patches per box Weight 9 lbs

Cut Edge Sealant

Walkway Rolls

Preformed Split Pipe Boots

Description Boots are fabricated from 45 mil thick reinforced TPO membranes Benefit/Application Three standard sizes are split to accommodate most common pipes and conduits Quantity/Size 6 Boots/carton Stock Sizes 1”-2”, 3”-5”, 6”-8” Special order Size 9” - 11” Weight 7.5 lbs/carton 7.5 lbs/carton 11 lbs/carton 11 lbs/carton

RTA (Roof Transition Anchor) Strip

Description 6” x 100’ 45 mil reinforced TPO membrane with pressure sensitive adhesive White Only Benefit/Application To be installed on horizontal surfaces Using plates and fasteners as a base attachment in fully adhered and Freedom™ systems Quantity/Size 6” x 100’ rolls 2 rolls/carton Weight 34 lbs/carton

Corner Curb Wraps

Description Corners are fabricated from 45 mil thick rein-forced TPO membrane Benefit/Application Four Standard sizes to flash curbs that are 24”, 36”, 48” and 60” in size. Four corners are required to flash the curb. Quantity/Size 4 Curb Wraps/carton. Stock Sizes are: 13.5”, 19.5”, 25.5”, 31.5” Special order sizes: 7.5”, 37.5” Weight 5.6 lbs/carton 7.4 lbs/carton 10.7 lbs/carton 12.5 lbs/carton

Preformed Expansion Joint Covers

Description 60 mil thick reinforced TPO membrane White Only Benefit/Application 5 standard sizes to accommodate most applications Two convenient styles available to accommodate both Roof-to-Roof and Roof-to-Wall applications. Quantity/Size Sizes are 4”, 6”, 8”, 10”, 12” Bellows 50 foot rolls Weight Ranges from 50-65 lbs.

EverGuard^® SA TPO Standing Seam Profile

Description 1-1/2 “ wide x 1-1/4” high x 10’ in length profile with pressure sensitive adhesive and release liner White, Tan, Gray, Regal Red, Regal Blue, Hartford Green Benefit/Application Applied over TPO roofing systems to simulate standing seam metal roof. Factory applied adhesive and release liner for easy installation on primed surfaces. Butt end aligned with dowels provided with the profiles Quantity/Size 10’ lengths 30 profiles/carton with connecting dowels Weight 47 lbs./carton

Freedom™ 5’-0” Dual HW (Heat Weld) Flashing

Description 45 mil and 60 mil reinforced membranes Benefit/Application Eliminates wasted membrane because of the two HW edges. 6” HW edge allows for more flexibility and easier installation Quantity/Size 5’ x 50’ Weight 76 lbs

EverGuard^® TPO Fluted Corner

Description 8” diameter nominal 50 mil non-reinforced TPO membrane Benefit/Application For use in flashing outside corners of base and curb flashings Quantity/Size 20 corners/carton Weight 3 lbs/carton

Square Tube Wraps

Description Square tube wraps are fabricated from 45 mil thick reinforced TPO membrane Benefit/Application Fast efficient alternative to field fabrication Tube wraps are split with a designed overlap so they can be wrapped around square or rectangular tubing and ensure a solid weld Available in three standard sizes Quantity/Size 6 Tube Wraps per carton Three Sizes 4” x 4”, 4” x 6”, 6” x 6” Weight 6-7 lbs/carton

Inside Corners

Description Inside Corners are formed using unreinforced membrane to a nominal 50 mil thickness Benefit/Application Manufactured to accommodate inside corners of base and curb flashings Designed for ease of welding in tight areas Quantity/Size 20 Corners per carton 6” x 6” x 5 1/4” Weight 3.5 lbs/carton

Pourable Sealer Pocket

Description Pourable Sealer Pocket is molded with TPO compound to a nominal 70 mil thickness White Only Benefit/Application Provides a structural foundation for application of EverGuard® Pourable Sealant with primer or a non-shrinking grout Lower cost than coated metal fabricated pockets Ideal for waterproofing irregular shaped roof penetrations Quantity/Size 6 Pockets per carton 9” x 6” x 4” oval with 3” base flange Weight 6.5 lbs/carton

Drain

Description Spun Aluminum drain pre-flashed with 55 mil unreinforced TPO membrane White Only Benefit/Application For use in waterproofing low slope roof drains Fast efficient alternative to field fabrication Quantity/Size 3 Drains per carton 10 sizes available: 1 1/2” to 6” in half inch increments Weight 3.25 – 3.70 lbs/carton

Scupper

Description Manufactured out of TPO Coated Metal and 55 mil unreinforced membrane White Only Benefit/Application For use in waterproofing wall scuppers Eliminates unnecessary flashing to waterproof the wall opening Quantity/Size 2 Scuppers per carton 4” x 6” x 12”, 8” x 10” x 12” Weight 5-9 lbs/carton

Vent

Description Manufactured out of reinforced 45 mil TPO membrane and galvanized steel White Only Benefit/Application For use in venting low slope mechanically attached roofs Limited to one-way flow to avoid moisture buildup within the roofing structure and material Quantity/Size 2 Vents per carton Weight 12 lbs/carton

TPO Color Membranes

1. Mass and dimensions stated are nominal unless otherwise indicated.

2. Store accessory flashing materials in original carton, rolls, or sheets on pallets or shelving in a dry area.

3. Accessory stocks should be rotated in a first-in, first-out manner.