Drill-Tec^™ RhinoBond^®
Fastening Plate 3" TPO Coated Galvalume^® Steel

The Drill-Tec^™ RhinoBond^® fastener plate is designed for use as the key element to the RhinoBond^® single-ply membrane roofing attachment system. The Drill-Tec^™ RhinoBond^® fastener plate is a 3” diameter Galvalume^® steel plate with a special thermoplastic polyolefin (TPO) coating. When used with the RhinoBond^® magnetic induction welding tool and appropriate Drill-Tec fasteners, The Drill-Tec^™ RhinoBond fastener plate will attach both insulation, or other substrate, and the EverGuard^® TPO membrane to a structure’s roof deck system. FM 1-90 or higher rating can be obtained with appropriate fasteners.

Drill-Tec^™ RhinoBond^® fastener plate is used to attach rigid insulation to roof decks. The special TPO coating on the plates allows for EverGuard^® TPO membrane to be welded to each plate using the RhinoBond^® magnetic induction welding tool. Insulation and membrane are attached using one fastener to create a durable roofing system. Typical application to steel or wood deck will use a Drill-Tec^™ XHD #15 roofing fastener or Drill-Tec^™ SXHD #21 roofing fastener. Fastener must be sized to penetrate steel decks a minimum of 3/4”. Drive the fastener until the screw head is seated securely.

Note: Be careful not to overdrive the fastener and fracture the skin of the insulation. Fastener must be tight enough so that plate does not turn or move.

Features & Benefits

• Drill-Tec^™ RhinoBond^® fastener plate reduces overall installation time for a single-ply roofing system
  
• The Drill-Tec^™ RhinoBond^® fastener plate is a 3” diameter Galvalume^® steel plate with a special thermoplastic polyolefin (TPO) coating
  
• Use to attach insulation using conventional techniques.
  
• Plate sits flat on EnergyGuard^® PolyIso, SecuRock^® Roof Board, and other high density insulations

Documents