Drill-Tec™ Pressure Plates
Steel and Plastic Pressure Plates Steel Plates
Product Description
Drill-Tec™ Steel Plates are made of Galvalume® coated steel.
The round design provides an even distribution of loads and eliminates sharp corners
that can damage the insulation or membrane. Drill-Tec 2-3/8” and 2-3/4” plates should
be used for lap seam fastening. Drill-Tec 3” plates should be used when fastening
insulation. These plates are designed to be used with Drill-Tec fasteners. Drill-Tec
Steel Plates are Factory Mutual and Dade County approved.
Physical Data
2” SHD Double-Barbed Seam Plate
- Application: Attaches EverGuard® membrane to the substrate.
- Fastener: Drill-Tec™ XHD #15 Fasteners, SXHD #21 Fasteners and Drill-Tec CD-10
Fasteners.
2-3/8” XHD Double-Barbed Seam Plate
- Application: Attaches EverGuard® membrane to the substrate.
- Fastener: Drill-Tec™ XHD #15 Fasteners and Drill-Tec CD-10 Fasteners.
2-3/4” Super XHD Double-Barbed Seam Plate
- Application: Attaches EverGuard® membrane to the substrate.
- Fastener: Drill-Tec SXHD #21 Fasteners and Drill-Tec CD-10 Fasteners.
3” Galvalume® Plates
- Application: Attaches insulation to the substrate.
- Fastener: Drill-Tec Standard, #12 Fasteners, HD #14 Fasteners, CD-10 Fasteners,
Fluted Nail.
Lite-Deck Plate
- Application: Attaches insulation to gypsum, Tectum® and lightweight
concrete decks.
- Fastener: Drill-Tec Lite-Deck Fastener.
2” NTB® Plate
- Application: Attaches single-ply membrane to gypsum, Tectum® and
lightweight concrete decks.
- Fastener: Drill-Tec NTB-1H w/ or w/o wire or NC 1” head.
3” NTB® Plate
- Application: Attaches insulation to gypsum, Tectum® and lightweight
concrete decks.
- Fastener: Drill-Tec NTB-1H w/ or w/o wire or NC 1” head.
Base Sheet Plate
- Application: Attaches base sheets to lightweight insulating concrete and various
gypsums.
- Fastener: Drill-Tec Standard or 1.2 Base Sheet Fastener.
Plastic Plates
Drill-Tec™ Plastic Plates are Factory Mutual and Dade County approved. Drill-Tec
3” plates should be used when fastening insulation. All Drill-Tec plates are round
and designed to be used with Drill-Tec fasteners.
Physical Data
3” Plastic Plate
- Application: Attaches insulation to the substrate.
- Fastener: Drill-Tec Standard, Heavy Duty, CD-10, Fluted Nail or
Toggle Bolt fastener.
- Material: Polypropylene
3” Locking Plastic Plate
- Application: Attaches insulation to the substrate.
- Fastener: Drill-Tec Standard, Heavy Duty or Toggle Bolt fastener.
- Material: Polypropylene
3” NTB® Plastic Plate
- Application: Attaches insulation to gypsum, Tectum® and lightweight
concrete decks.
- Fastener: Drill-Tec NTB-2H with wire barbs, NC 2” head.
- Material: Polypropylene
|
Documents
|
