Cobra Roof Ridge Vents - Cobra Exhaust Vent

Cobra® Exhaust Vent for Roof Ridge

Effective attic ventilation is critical for a long-lasting roof!
A properly balanced attic ventilation system will help to:

  • Remove excess heat
    and moisture to protect your roof from premature deterioration

  • Help prevent roof rot
    in your attic or roof deck

  • Minimize peeling
    and extend the life of exterior and interior paint

  • Limit the growth
    of harmful mold

  • Safeguard your attic
    possessions against mildew damage

  • Guard against ice damming
    in harsh winter climates

  • Promote energy efficiency
    by reducing excessive heat in your attic

Good House Keeping Seal

Cobra® Exhaust Vent is a key part of the GAF Lifetime Roofing System, and has even earned the prestigious Good Housekeeping Seal.


Homeowner’s Best Choice

  • Environmentally Friendly……
    Manufactured with 100% recycled fiber to help reduce the amount of material entering landfills.

  • Vents Your Attic…
    Allows heat and condensation to escape at the most effective location — the ridge

  • Looks Terrific…
    100% shingle-over design is virtually invisible when installed

  • Excellent Protection…
    Helps to prevent wood rot and extends the life of your
    exterior paint

  • Safeguards Possessions…
    Helps limit mildew growth caused by damp attic air

  • Promotes Energy Efficiency…
    by reducing excessive heat in your attic

  • Watertight…
    Passes 110 mph wind-driven rain and snow infiltration tests

  • Safer…
    Helps prevent problems with insects, birds, and animals in your attic

  • Peace Of Mind…
    Up to a Lifetime ltd. warranty when installed on Lifetime Shingle roofs

Professional’s Best Choice

  • Enhanced Design…
    Improved compression resistance helps reduce waviness that can detract from the roof's finished look

  • Easy Installation…
    No need for nail gun adapters, complicated wrapping, connectors, or end-plugs

  • Nails Included…
    Includes Smart Nails ™ for hand-nailing, or
    13/4" coil nails for nail guns, ensure consistent installation

  • Excellent Performance…
    Net free ventilating area:
    Cobra® Hand Nail: 16.9 sq. in./linear foot Cobra® Nail Gun: 14.1 sq. in./linear foot

  • Cap Shingle Compatible……
    Options available for 12", 9", and metric width ridge cap shingles

  • Two Lengths…
    Available in 20' & 50' rolls.

Lifetime Roofing Badge Green Spec
Miami Dade UL Classified

Texas Department of Insurance
Product Evaluation RV-19

Florida Building Code


Balanced Ventilation Requirements

Balanced ventilation requires an equal amount of intake ventilation and exhaust ventilation. GAF recommends, at a minimum, providing 1 square foot of Net Free Ventilation for every 300 square feet of attic floor space. Consult local building codes for specific ventilation requirements in your area.

  1. Calculate the total square footage of the attic floor area (round up to the next highest number). This number will determine the minimum total linear feet of Cobra® Exhaust Vent that is needed.
  2. Find the appropriate amount of Cobra® Exhaust Vent and minimum intake ventilation that corresponds to the total attic square footage.
How Much Do I Need? (Based on 1/300 Rule)
Total Attic
Square Footage
Recommended Length of
Cobra® Exhaust Vent (Feet)*
Minimum Intake Ventilation
(Net Free Area in Sq. In.)*

*First figure pertains to hand nail version, second figure pertains to nail gun version.
NOTE: Always have a balanced ventilation system. In no case should the amount of exhaust ventilation at the ridge exceed the amount of soffit ventilation.


All documents are U.S. English unless otherwise noted

Get Automatic Lifetime Protection On Your Cobra® Exhaust Vents and Your Entire GAF Roofing System!

  • A Lifetime ltd. warranty... on your shingles and all qualifying GAF accessories! (See Details)
  • Non-prorated coverage for the first 10 years (See Details)

Professional Installation

GAF Roof Wizard
Virtual Home Remodeler

Product Pricing and Where to Buy