EverGuard® & EverGuard Extreme® TPO Accessories

TPO Roofing Components

The GAF EverGuard® TPO single-ply roofing system includes an extensive line of EverGuard® TPO flashing accessories for use with EverGuard® TPO roofing systems. EverGuard® TPO flashing accessories are heat welded to the EverGuard® roofing membrane. They are easy to install and provide secure protection from roof edge to parapet to penetration to wall. The following EverGuard® TPO flashing accessories are available in standard colors of white, gray and tan unless otherwise noted.

Boots

Vent Boot

Description

  • 75-mil molded membrane

Benefit/Application

  • One standard size accommodates most common pipes and conduits
  • Supplied with stainless steel clamping rings

Quantity/Size

  • Fits 1” - 6” diameter pipes
  • 6 Vent Boots per carton

Weight

  • 9 lb/carton
Split Pipe Boots

Description

  • Boots are fabricated from 45-mil thick reinforced TPO membranes

Benefit/Application

  • Three standard sizes are split to accommodate most common pipes and conduits

Quantity/Size

  • 6 Boots per carton
  • Stock Sizes 1”-2”, 3”-5”, 6”-8”
  • Special order Size 9” - 11”

Weight

  • 1"-2" 7.5 lb/carton
  • 3"-5" 7.5 lb/carton
  • 6"-8" 11 lb/carton
Square Tube

Description

  • Square tube wraps are fabricated from 45-mil thick reinforced TPO membrane

Benefit/Application

  • Fast, efficient alternative to field fabrication
  • Tube wraps are split with a designed overlap so they can be wrapped around square or rectangular tubing and ensure a solid weld
  • Available in three standard sizes
  • Includes stainless-steel clamp for top edge seal

Quantity/Size

  • 6 Tube Wraps per carton
  • Three Sizes 4” x 4”, 4” x 6”, 6” x 6”

Weight

  • 4" x 4" 6.0 lb/carton
  • 4" x 6" 6.5 lb/carton
  • 6" x 6" 7.0 lb/carton

Corners

Preformed Corners

Description

  • One standard size
  • 60-mil thick molded membrane

Benefit/Application

  • Can be cut to accommodate use as either an inside or outside corner reinforcement

Quantity/Size

  • Corner Size: 3" x 3” with 6” flange
  • 20 Corners per carton

Weight

  • 9 lb/carton
Corner Curb Wrap

Description

  • Corners are fabricated from 45-mil thick reinforced TPO membrane
  • White, Gray, Tan

Benefit/Application

  • Four Standard sizes to flash curbs that are 24”, 36”, 48”, and 60” in size.
  • Four corners are required to flash the curb.

Quantity/Size

  • 4 Curb Wraps per carton.
  • Stock Sizes are: 13.5”, 19.5”, 25.5”, 31.5”
  • Special order sizes: 7.5”, 37.5”

Weight

  • 13.5" 5.6 lb/carton
  • 19.5" 7.4 lb/carton
  • 25.5" 10.7 lb/carton
  • 31.5" 12.5 lb/carton
Fluted Corner

Description

  • 8” diameter nominal 50-mil non-reinforced TPO membrane
  • White, Tan, Gray

Benefit/Application

  • Manufactured to accommodate imperfect corners
  • Designed for ease of welding in tight areas

Quantity/Size

  • 20 corners per carton

Weight

  • 2.5 lb/carton
Inside Corners

Description

  • Inside Corners are formed using unreinforced membrane to a nominal 50-mil thickness

Benefit/Application

  • Manufactured to accommodate inside corners of base and curb flashings
  • Designed for ease of welding in tight areas

Quantity/Size

  • 20 Corners per carton 6” x 6” x 5 1/4”

Weight

  • 3.5 lb/carton

Flashing & Rolls

EverGuard® TPO 6” Cover Tape

6 inch cover tape

Description

  • EverGuard® TPO 6” Cover Tape is a 6” wide, non-reinforced TPO membrane backed with a butyl tape adhesive.
  • White, Tan, Gray

Benefit/Application

  • For use in stripping-in primed galvanized edge metal and to install RapidSeam end laps.

Quantity/Size

  • Roll Length 100’
  • Roll Width 6”
  • 2 rolls/case

Weight

  • 37.4 lb./case

UN-55 Detailing Membrane

UN-55 Detailing membrane

Description

  • 55-mil thick unreinforced membrane
  • White, Tan, Gray, Regal Red, Regal Blue, Hartford Green (Energy Tan in the West)

Benefit/Application

  • Alternative flashing/reinforcement material for penetrations and corners
  • Required wherever preformed vent boots cannot be used

Quantity/Size

  • 24” x 50’ roll

Weight

  • 28 lb/roll

TPO 45 mil Utility Flashing Strip

UN-55 Detailing membrane

Description

  • 45-mil thick unreinforced membrane
  • White, Tan, Gray, Regal Red, Regal Blue, Hartford Green (Energy Tan in the West)

Benefit/Application

  • Use for stripping in coated metal flanges

Quantity/Size

  • 8” x 100’ roll

Weight

  • 18 lb/roll

Coated Metal Sheets

Description

  • 24-gauge steel with a 25-mil thick membrane film
  • White, Tan, Gray, Regal Red, Regal Blue, Hartford Green (Energy Tan in the West)

Benefit/Application

  • TPO membrane is laminated to galvanized sheet metal
  • Cuts and forms like standard sheet metal
  • Field and flashing TPO membrane heat welds directly to coated metal
  • For metal gravel stop and drip edges, metal base and curb flashing, and sealant pans and scupper sleeves

Quantity/Size

  • 4” x 10’ sheets
  • 10 or 30 sheets per pallet

Weight

  • 47 lb/sheet
UN-55 T-Joint Cover Patches

Description

  • 55-mil thick unreinforced membrane

Benefit/Application

  • Conforming membrane seal for use over T-joints in 60- and 80-mil membrane applications

Quantity/Size

  • 100 patches per box

Weight

  • 9 lb

RTA (Roof Transition Anchor) Strip

RTA Strip

Only Available in EverGuard®

Description

  • 6” x 100’ 45-mil reinforced TPO membrane with pressure-sensitive adhesive
  • White Only

Benefit/Application

  • To be installed on horizontal surfaces using plates and fasteners as a base attachment in fully adhered and EverGuard® Freedom™ systems

Quantity/Size

  • 6” x 100’ rolls 2 rolls per carton

Weight

  • 34 lb/carton

Expansion Joint

Preformed Expansion Joint covers

Description

  • 60-mil thick reinforced TPO membrane
  • White Only

Benefit/Application

  • 5 standard sizes to accommodate most applications
  • Two convenient styles available to accommodate both roof-to-roof and roof-to-wall applications.

Quantity/Size

  • Sizes are 4”, 6”, 8”, 10”, 12” Bellows
  • 50-foot rolls

Weight

  • Ranges from 50-65 lb.

Freedom™ 5’-0” Dual HW (Heat Weld) Flashing

Freedom Dual HW Flashing

Only Available in EverGuard®

Description

  • 45-mil and 60-mil reinforced membranes

Benefit/Application

  • Eliminates wasted membrane because of the two HW edges.
  • 6” HW edge allows for more flexibility and easier installation

Quantity/Size

  • 5’ x 50’

Weight

  • 76 lb
Scupper

Available in EverGuard® and EverGuard Extreme®

Description

  • Manufactured out of TPO-coated metal and 55-mil unreinforced membrane
  • White Only

Benefit/Application

  • For use in waterproofing wall scuppers
  • Eliminates unnecessary flashing to waterproof the wall opening

Quantity/Size

  • 2 Scuppers per carton 4” x 6” x 12”, 8” x 10” x 12”

Weight

  • 5-9 lb/carton

Other

Yellow Safety Tape

Only Available in EverGuard®

Description

  • EverGuard TPO Yellow Safety Tape is made up of 30-mil unreinforced TPO and is used to provide a warning to take caution around potential roof hazards.

Benefit/Application

  • Easy to install
  • Built to last for years
  • Requires low maintenance

Quantity/Size

  • 100 ft (length) x 6 in (width)

Weight

  • 38 lb./box
TPO Coated Metal Sheets

Description

  • EverGuard® TPO Coated Metal Sheets are constructed with TPO membrane laminated to galvanized sheet metal.

Benefit/Application

  • 24- gauge steel with a 25-mil thick membrane film
  • Field and flashing TPO membrane heat welds directly to coated metal
  • Also available in:
    • Coated Aluminum — 23 lb./sheet
      — 25-mil TPO and 40-gauge corrosion resistant aluminum
    • Coated Stainless — 40 lb./sheet
      — 25-mil TPO and 24-gauge stainless steel
    • 20-gauge Galvanized — 60 lb./sheet
      — 25-mil TPO and 20-gauge galvanized steel

Quantity/Size

  • 4’ (1.21 m) x 10’ (3.05 m) sheets
  • 5, 10, or 30 sheets per pallet

Weight

  • 40 lb./sheet
Split Pipe Boots

Only Available in EverGuard®

Description

  • 125 mil extruded and embossed TPO
  • Gray and Yellow

Benefit/Application

  • Great traction with diamond plate design
  • Available in rolls
  • Heat welds directly to TPO membrane or installed with seam tape

Quantity/Size

  • 34” x 50’

Weight

  • 118 lb/roll
Pourable Sealer Pocket

Description

  • Pourable Sealer Pocket is molded with TPO compound to a nominal 70-mil thickness
  • White Only

Benefit/Application

  • Perfect for irregular roof penetrations
  • Fill with EverGuard® One-Part Pourable Sealant or TOPCOAT FlexSeal for the perfect finish

Quantity/Size

  • 6 Pockets per carton
  • 12” x 15¼” x 4” oval with 3” base flange

Weight

  • 6.5 lb/carton
Drain

Only Available in EverGuard®

Description

  • Spun aluminum drain pre-flashed with 55-mil unreinforced TPO membrane
  • White Only

Benefit/Application

  • For use in waterproofing low-slope roof drains
  • Fast, efficient alternative to field fabrication
  • No special tools needed for installation

Quantity/Size

  • 3 Drains per carton
  • 10 sizes available: 1 1/2” to 6” in half inch increments

Weight

  • 3.25 – 3.70 lb/carton

Coated SpeedTite Drain

Drain

Only Available in EverGuard®

Description

  • The Coated SpeedTite Drain can be made watertight in seconds without using any tools

Benefit/Application

  • Installs in half the time of other insert drains, enhancing productivity
  • One-piece seamless body provides strength and durability
  • TPO or PVC-coated flange for direct hot-air welding of TPO or PVC roof membranes

Quantity/Size

  • 2 sizes available: 3", 4"
  • 1 drain/carton

Weight

  • 3": 8.5 lb./carton
  • 4": 8.9 lb./carton

Coated Hercules Drain

Drain

Only Available in EverGuard®

Description

  • One-piece seamless body manufactured from 0.125" 11-gauge spun aluminum

Benefit/Application

  • Depressed sump area for improved flow and to facilitate drainage
  • Incorporates U-Flow® Seal technology, providing a mechanical watertight connection to PVC or cast iron pipes
  • TPO or PVC-coated flange for direct hot-air welding of TPO or PVC roof membranes

Quantity/Size

  • 4 sizes available: 3", 4", 5", 6"
  • 1 drain/carton

Weight

  • 3": 7.4 lb./carton
  • 4": 7.9 lb./carton
  • 5": 7.9 lb./carton
  • 6": 8.5 lb./carton
Vent

Only Available in EverGuard®

Description

  • Manufactured out of reinforced 45-mil TPO membrane and galvanized steel
  • White Only

Benefit/Application

  • For use in venting low slope mechanically attached roofs
  • Limited to one-way flow to avoid moisture buildup within the roofing structure and material

Quantity/Size

  • 2 Vents per carton

Weight

  • 12 lb/carton

1. Mass and dimensions stated are nominal unless otherwise indicated.

2. Store accessory flashing materials in original carton, rolls, or sheets on pallets or shelving in a dry area.

3. Accessory stocks should be rotated in a first-in, first-out manner.

walkway roll corner curb pourable sealer fluted corner universal corner vent coated metal drain t-joint cover patches inside corner scupper square tube wrap preformed split pipe boot preformed vent boot

Documents

All documents are U.S. English unless otherwise noted

Commercial Roofing EagleView Commercial Property Owners Portal Architects And Specifiers Green Roof Central




   





 
Product Princing and Where to Buy