Great Value - Superior performance at a cost-effective price
Superior Seam Strength - Heat-welded seams provide greater seam strength to taped and other seams
Long-Term Weathering - Excellent long-term heat and UV resistance
Energy-Saving - Highly reflective and emissive white roof can help reduce energy costs and urban heat island effect
Versatile Application Method
Factory-applied polyester fleece provides additional protection to the membrane, offering a variety of benefits, including:
- Does not require a slip sheet when recovering over a variety of roofs
- Provides enhanced puncture resistance, especially in areas more prone to hail
Increases installation efficiency 2–3 times when installing EverGuard® Fleece-back TPO with GAF 2-Part Roofing Adhesive (compared to standard TPO adhesives
Outperforms standard TPO in heat aging and UV tests—the best predictors of TPO performance
- After accelerated heat aging at 275°F (135°C) for 105 days, EverGuard® Fleece-back TPO showed no cracking— while every one of the competitors’ samples had failed!
- UV testing—greater than 2.5 times the industry standard (ASTM D6878 weather resistance test)
Guarantees are available up to 30 years when using EverGuard® Fleece-back TPO 80 mil Membrane*
Easier to install due to:
- Large welding window
- Most complete line of accessories
- 10’ (3.05 m) wide sheets
EverGuard® Fleece-back TPO can be installed with a wide range of applications:
Mechanically Attached Application... for a quick and cost-effective system that can be installed practically year-round.
Adhered Application... can be installed with EverGuard® WB181 Bonding Adhesive (water based) or hot asphalt for the smoothest appearance. Provides superior wind uplift performance.
LRF-O Adhesive... two-part low-rise polyurethane foam adhesive that is low VOC and accommodates minor surface irregularities. Available in a cartridge or 5-gallon container.
LRF-M Adhesive... two-part low-rise polyurethane foam adhesive that is low VOC and accommodates minor surface irregularities. Can also be used for ISO insulation applications. Available in a cartridge or 5-gallon container.
2-Part Roofing Adhesive... self-contained low-rise foam dispensing kit offering 20 squares per kit so there are fewer changeovers. Cost effective since you don’t need spray equipment and no downtime/maintenance worries. Can also be used for ISO insulation applications.
Field fabrication of TPO accessories is time-consuming, costly, and inconsistent, and can lead to unreliable details that compromise a watertight roofing system. EverGuard® TPO prefabricated accessories deliver consistent quality and eliminate the worry and problems often associated with field fabrication. They can also boost productivity up to 200%,** while reducing installed cost by up to 12%.
*See applicable guarantee for complete coverage and restrictions.
**Based on GAF estimate to field-fabricate flashing details.
GAF's sustainability credentials include:
NSF/ANSI 347 — Providing architects and contractors with a certified sustainable option for single-ply roofing membranes
UL Landfill Waste Diversion Validation — Zero Waste to Landfill (Mt. Vernon TPO Plant)
HPDs — Only single-ply roofing manufacturer that publishes Health Product Declarations (HPDs) for transparent reporting and LEED® v4 compliance
EPDs — Publishes Environmental Product Declarations (EPDs) for Single-Ply Roofing Membranes
UL Listed, FM Approved, Miami-Dade County Approved, Florida Building Code Approved, CRRC Listed, Title 24 Compliant*, ENERGY STAR® Qualified**, ASTM D6878.
|Physical Properties||ASTM Test Method||ASTM D6878 Minimum||
Typical Test Data
1. Certain data is provided in MD (machine direction) x CMD (cross machine direction) format.
2. Data is based upon typical product performance, and is subject to normal manufacturing tolerance and variance.
|Nominal Thickness||ASTM D751||0.039" (min.) (0.99 mm)||0.080" (2.03 mm)|
|Breaking Strength||ASTM D751 Grab Method||220 lbf/in. (38.5 kn/m||440 lbf x 390 lbf (656 x 581 kg/m|
|Factory Seam Strength||ASTM D751||66 lbf (98.34 kg/m)||155 lbf (membrane failure) (231 kg/m)|
|Elongation at Break||ASTM D751||15%||30%|
|Heat Aging||ASTM D573||90% Retention of Breaking Strength and Elongation at Break||100%|
|Tear Strength||ASTM D751 8" x 8" (203 x 203 mm) Sample||55 lbf (81.95 kg/m)||100 lbf x 180 lbf (149 x 268 kg/m)|
|Puncture Resistance||FTM 101C Method 2031||Not Established||>380 lbs. (172 kg)|
|Cold Brittleness||ASTM D2137||-40° C||-40° C|
|Permeance||ASTM E96||Not Established||0.08 Perms|
|Dimensional Change||ASTM D1204 @158° F (70° C), 6 hrs.||+/-1%||0.4%|
|Water Absorption||ASTM D471 @158° F (70° C), 1 week||+/-3.0%||0.7%|
|Hydrostatic Resistance||ASTM D751 Method D||Not Established||430 psi|
|Ozone Resistance||ASTM D1149||No visible deterioration @ 7 x magnification||No visible deterioration @ 7 x magnification|
|Reflectivity (white) Initial/Aged||ASTM C1549||N/A||0.76/0.68|
|Emissivity (white) Initial/Aged||ASTM C1371||N/A||0.90/0.83|
|Weather Resistance||ASTM G155/D6878||10,080 KJ/(m2 . nm) at 340 nm||>25,000 KJ/(m2 . nm) at 340 nm|
|Heat Aging||ASTM D573||240° F (115° C) for 32 weeks||60 weeks|
|Thickness Above Scrim||ASTM D7635||Min 30% of Total Thickness||31.4" (798 mm) (Nominal)|
|Up to 20 years|
Note: Product sizes, dimensions, and widths are nominal values and are subject to normal manufacturing/packaging tolerance
|Color||Full Size Roll||Full Roll Weight||Half Roll Size||Half Roll Weight|
|White, Tan, Gray||
10' x 50'
(3.05 x 15.24 m)
(500 sq. ft.
|238 lbs. (108 kg)||
5’ x 50’
(1.52 x 15.24 m)
(250 sq. ft.
|112 lbs. (51 kg)|
|Note: Membrane rolls shipped horizontally on pallets, stacked pyramid-style and banded.|
|Storage||Store rolls on their sides on pallets or shelving in a dry area.|
|Safety Warning||Membrane rolls are heavy. Position and install by at least two people.|
All documents are U.S. English unless otherwise noted