StreetBond® CemBase Asphalt Fortifier


Description

StreetBond® CemBase Asphalt Fortifier is a highperformance cementitious, epoxy-modified acrylic based, waterborne surfacing product designed for application on stamped (textured) asphalt pavements only. StreetBond® CemBase Asphalt Fortifier fortifies asphalt pavement to help resist scuffing on weaker stamped asphalt such as driveways or pathways. StreetBond® CemBase Asphalt Fortifier is worker safe, environmentally safe, creates no unpleasant odors (during or after installation) and meets EPA requirements for Volatile Organic Compounds (VOC). StreetBond® CemBase Asphalt Fortifier and StreetBond® SB150 are fully recyclable with the asphalt. StreetBond® SB150’s friction properties are suitable for both pedestrian and vehicular applications.



Uses

  • StreetBond® CemBase Asphalt Fortifier fortifies asphalt pavement to help resist scuffing on weaker stamped asphalt such as driveways or pathways.
  • Applied as the two initial layers in a StreetBond® application over a printed surface that needs fortification.
  • StreetBond® CemBase Asphalt Fortifier is combined with StreetBond® Colorants to offer a wide range of colors and can also be combined with StreetBond® Solar Reflective (SR) Colorants to produce a cool pavement surfaces for compliance with LEED specifications for urban heat island mitigation and to provide more comfortable environments.
  • StreetBond® CemBase Asphalt Fortifier is applied in two layers as a base coat and must always be covered with at least one layer StreetBond® SB150. For example, if a project would typical require four layers of StreetBond® SB150 on a stamped asphalt surface, a project needing fortification would have two layers of StreetBond® CemBase Asphalt Fortifier applied, followed by two layers of StreetBond® SB150.

Physical Properties

CEMBASE ASPHALT FORTIFIER

Volume Solids
60% ±2% [ASTM D2697]
Weight Solids
74% ±2% [ASTM D2369]
VOC (calculated)
<25 g/L
Freeze Point
32°F (0°C)
Density
14.2 lb/gal (1.70 g/mL)
Mandrel Bend
3/8” @ 21°C
Water Absorption
¼” @ 21°C
Permeance
13.43g/m² / 24hr/mmHg (52 mils
Application
Temperature
+50°F to 105°F (Ambient) (10°C to 40°C)
Drying Time
(Touch Dry)
1–4 hours at 77°F (25°C) and 40% humidity [ASTM D5895]
Taber Abrasion
(Dry)
0.41 g/100 cycles
Taber Abrasion
(Wet)
6.92 g/100 cycles

Documents

All documents are U.S. English unless otherwise noted

Commercial Roofing EagleView Commercial Property Owners Portal Architects And Specifiers Green Roof Central




   





 
Product Princing and Where to Buy