Elastomeric Roofing - TOPCOAT MB Plus

TOPCOAT® MB Plus Membrane



Description

TOPCOAT® MB Plus Membrane is a water-based, low VOC, acrylic, sprayable polymeric liquid, which cures to form a seamless rubber membrane. Covers and protects most roof surfaces including modified bitumen (smooth and granulated), smooth BUR, and metal. MB Plus Membrane is an ENERGY STAR® qualified reflective product that will help to reduce building temperatures. TOPCOAT® MB Plus Membrane is listed by the Cool Roof Rating CouncilSM for solar reflectance and thermal emittance. It is highly reflective, flexible and, due to unique emulsion chemistry, resists unsightly bleed-through over asphalt substrates better than solvent-based systems. Available in white (for maximum reflectivity) and custom colors. It is non- flammable, presents minimal hazard to the applicator or the environment, and cleans up with water.


Uses

TOPCOAT® MB Plus Membrane is designed to protect and restore aged roofs. This product can be used on modified bitumen, BUR, Hypalon®, metal as a primer, wood, and concrete. For use with water-based sealants and top coats only. Substrate shall not pond water for a period longer than 48 hours. Surface must be free of ponding water, ice, snow, and debris prior to application. Do not apply at temperatures below 42°F. Substrate temperatures must be below 120°F when applying product.


Advantages
  • ENERGY STAR® qualified reflectivity can dramatically decrease building temperatures

  • Highly reflective and listed by the Cool Roof Rating CouncilSM for solar reflectance and thermal emittance

  • Low VOC, non-flammable, and presents minimal hazard to the applicator or the environment

  • Easier to apply than solvent-based systems for asphalt surfaces

  • Limited warranty available for up to 10 years*

  • Guarantees available for up to 10 years**

  • Available in 5-gallon pails, 55-gallon drums, and bulk totes

For application questions, please contact GAFMC Contractor Services at
1-800-766-3411.


Applicable Standards

ASTM D-412, ASTM D-21-96, ASTM D-1475, ASTM E-1644

Note: Repair leaks promptly to avoid adverse effects, including mold growth

*See warranties and guarantees for complete coverage and restrictions
**When used as a part of a multi-ply system

TOPCOAT® MB Plus Membrane Technical Data
Application Rate: 1.0 to 3.0 gallons/100 sq.ft. total, varies by system
Application Method: Airless sprayer, brush, or roller
Application Temp (air, surface): 42°F – 120°F
Drying Time (75°F, 50% RH):
Approximately 24 hours per coat
Wet Mil Thickness:
(1.0 Gallon/100SF) – 16 wet mils
Dry Mil Thickness: (1.0 Gallon/100SF) – 9 dry mils
Total Solids (by weight): 65% ± 2%
Total Solids (by volume): 54% ± 2%
Specific Gravity: 1.32 ± 0.1
Weight per Gallon: 11.0 ± 0.5 lbs
Viscosity (75°F): 15,000 ± 2,000 cps
Elongation: 275%
Initial Reflectivity: 0.83 (white only)
Aged Reflectivity: 0.67 (white only)
Initial Emissivity: 0.88 (white only)
Aged Emissivity: 0.85, 3 year (white only)

Initial SRI:

104 (white only)
Aged SRI: 91 (white only)
Storage: Store in well-ventilated area at 50°F to 80°F; protect from freezing
Shelf Life: 1 Year
Clean up: Water before curing

Hyphalon® is a registered trademark of DuPont Performance Elastomeric LLC.

Documents

All documents are U.S. English unless otherwise noted

Commercial Roofing EagleView Commercial Property Owners Portal Architects And Specifiers Green Roof Central




   





 
Product Princing and Where to Buy
© Copyright 2017 GAF | Privacy Policy and Legal | GAF Canada | GAF U.S.