Elastomeric Roofing - TOPCOAT Flashing Grade

TOPCOAT® Flashing - Brush Grade WOB



Description

TOPCOAT® Flashing - Brush Grade WOB is a light gray, water-based 100% acrylic, synthetic rubber sealant that is applied to seams, fasteners, flashings, and penetrations prior to the application of the TOPCOAT® Membrane. Like the TOPCOAT® Membrane, it has superior adhesion, flexibility, and resistance to ultraviolet degradation.


Uses

TOPCOAT® Flashing - Brush Grade WOB is designed for use on metal, wood, and concrete. Provides a seal along seams and around fasteners on metal roofs and excellent sealing around curbs and counter flashings. Do not apply at temperatures below 42°F. Substrate temperatures must be below 120°F when applying product.


Advantages
  • A synthetic rubber sealant that cures in the ultraviolet rays of the sun

  • Water-based; environmentally friendly and safe

  • Strong; forms a flexible seal that will not become brittle

  • Can be used in conjunction with TOPESTER Fabric to provide a superior seam

  • Flexible; will expand and contract with metal roof

  • Free from plasticizers and oils that will migrate out over time

  • Required for joints, seams, penetrations, and fastener heads

  • Limited material warranty available for up to 10 years*

  • Guarantees available for up to 20 years**

  • Available in 1-gallon, 5-gallon, 55-gallon containers, and 1-quart cartridges

For application questions, please contact GAF Contractor Services at
1-800-766-3411.


Applicable Standards

ASTM D-412, ASTM G-21, ASTM D-21-96, ASTM D-1475, ASTM E-1644,
and FTMS 141.6271

Note: Repair leaks promptly to avoid adverse effects, including mold growth

* See warranties and guarantees for complete coverage and restrictions
** When used as part of a multi-ply system

TOPCOAT® Flashing Brush Grade WOB Technical Data
Application Rate: 5 gallons/125 lineal ft. of seam (6” width)
Application Method: Brush or caulking gun
Application Temp (air, surface): 42° - 120°F
Drying Time (75°F, 50% RH): Approximately 24 hours
Recommended Wet Mil Thickness: 105 wet mils
Recommended Dry Mil Thickness: 60 dry mils
Total Solids (by weight): 68% ± 1%
Total Solids (by volume): 56% ± 2%
Specific Gravity: 1.44 ± 0.1
Weight per Gallon: 12.0 ± 0.5 lbs
Viscosity (75°F): 225,000 ± 22,500 cps
Tensile: 225 psi ± 10%
Storage: Store in well-ventilated area at 50°F to 80°F; protect from freezing
Shelf Life: 1 Year
Clean-up: Water before curing

Documents

All documents are U.S. English unless otherwise noted

Commercial Roofing EagleView Commercial Property Owners Portal Architects And Specifiers Green Roof Central




   





 
Product Princing and Where to Buy