Effective attic ventilation is
critical for a long-lasting roof!
<< Back to Attic Ventilation
A properly balanced attic ventilation system will help to:
- Remove excess heat and moisture to protect your roof from premature deterioration
- Prevent roof rot in your attic or roof deck
- Minimize peeling and extend the life of exterior and interior paint
- Limit the growth of harmful mold
- Safeguard your attic possessions against mildew damage
- Guard against ice damming in harsh winter climates
- Possibly reduce excessive heating and air conditioning costs
Cobra® Snow Country™ exhaust vent is a key part of the GAF-Elk Smart Choice® Roof System Solution, and has even earned the prestigious Good Housekeeping Seal
Homeowner’s Best Choice
- Vents Your Attic…
Allows heat and condensation to escape at the most effective location—the ridge.
- Looks Terrific…
Shingle-over design blends into your ridge line.
- Watertight…
Passes the 110 mph wind-driven rain test.*
- Snow Guard™…
Helps prevent snow infiltration in harsh winter weather.
- Insect Guard…
Specially-designed louver spacing helps keep insects out.
- Energy Efficient…
May even reduce your utility bills!
- Durable…
Designed with high-impact polymers.
- Peace Of Mind…
Backed by a 40-year ltd. warranty.**
*Under controlled laboratory conditions.
**See ltd. warranty for complete coverage and restrictions.
Professional’s Best Choice
- Effective…
Provides 18 sq. inches per linear foot of net free ventilating area.
- Easy Sizing…
EasyTear™ feature allows you to hand-tear product in 3" increments—no knives necessary and less waste!
- Fits Better…
Extra-flexible hinge design allows installation on 3:12 to 16:12 sloped roofs.
- No End Caps Needed!
- Crush Resistant…
Internal structural support for added durability.
- No Gaps…
Edge overhang allows smooth, continuous coverage between sections.
- Less Call-backs…
External baffles help deflect wind and rain.
- Cap Shingle Compatible…
Works with traditional size ridge cap shingles.
Balanced Ventilation Requirements
Balanced ventilation requires an equal amount of intake ventilation and exhaust ventilation. GAF-Elk recommends, at a minimum, providing 1 square foot of Net Free Ventilation for every 300 square feet of attic floor space. Consult local building codes for specific ventilation requirements in your area.
- Calculate the total square footage of the attic floor area (round up to the next highest number). This number will determine the minimum total linear feet of Cobra® Snow Country™ exhaust vent that is needed.
- Find the appropriate amount of Cobra® Snow Country™ exhaust vent and minimum intake ventilation that corresponds to the total attic square footage.
Based on 1/300 Rule |
Total
Attic Square
Footage
|
Recommended Length of Cobra® Snow Country™ Exhaust Vent (Feet)*
|
Minimum Exhaust Ventilation (Net Free Area in Sq. In.)
|
1600 |
22 |
396 |
1900 |
26 |
468 |
2200 |
30 |
540 |
2500 |
34 |
614 |
2800 |
38 |
684 |
3100 |
42 |
756 |
3400 |
46 |
828 |
Cobra® Snow Country™ exhaust vent has 18.0 sq. in./linear ft. of net free ventilating area.
NOTE: Always have a balanced ventilation system. In no case should the amount of exhaust ventilation at the ridge exceed the amount of soffit ventilation.
Application Instructions
Cobra® Snow Country™ Ridge Vent - Application instructions
If you do not have the "Plug-in" for your browser, click the button to download the reader, Free! Metric Size Shingles

<< Back to Attic Ventilation
|